Operation - Mettler Toledo M200 easy Schnelleinrichtung

1

Operation

Entry of data values, selection of data entry options
Use the
in a selection of values or options of a data entry field.
Note: Some screens require configuring multiple values via the same data field (ex: configuring
multiple setpoints). Be sure to use the
or
m .
Navigation with
If a
u
or the
c
u
menu (go back one screen). This can be a very useful option to move back up the menu tree
without having to exit into the measuring mode and re-enter the menu.
Exit menu
Note: Exit the menu at any time by pressing the
transmitter returns to the Measurement mode.
"Save changes" dialog
Three options are possible for the "Save changes" dialog:
– "Yes & Exit": Save changes and exit to measuring mode
– "Yes &
– "No & Exit": Don't save changes and exit to measuring mode
The "Yes &
re-enter the menu.
4
key to increase or the
m
key to toggle between all configuration options before entering to the next display screen.
in Display
u
is displayed on the bottom right hand corner of the display, you can use the
key to navigate to it. If you click [ENTER] you will navigate backwards through the
b
": Save changes and go back one screen
u
" option is very useful if you want to continue configuring without having to
u
key to decrease a digit. Use the same keys to navigate with-
.
or key to return to the primary field and the
c b
b
and key simultaneously (ESCAPE). The
c