Slave Mode - Cameo ZENIT Z180 G2 Bedienungsanleitung

SLAVE MODE

Access the selection menu by pressing MODE. Using the UP and DOWN control keys, now select the "Slave" menu option (note arrow) and
confirm via ENTER. Connect the slave and master unit (same model) using a DMX cable, and activate one of the standalone modes (Auto,
Static, Color Macro, Tunable White, User Color) on the master unit. The slave unit will now follow the master unit. If there is no control signal,
the numbers on the display will begin to flash. This flashing will stop as soon as a control signal is received.
---------------- Menu ----------------
DMX address
DMX mode
Stand Alone
 Slave
Settings
System Information
DEVICE SETTINGS (Settings)
Access the selection menu by pressing MODE. Using the UP and DOWN control keys, now select the "Settings" menu option (note arrow)
and confirm via ENTER.
---------------- Menu ----------------
DMX address
DMX mode
Stand Alone
Slave
 Settings
System Information
This will take you to the submenu for setting the following submenu options (select via UP and DOWN, confirm via ENTER, change value or
status via UP and DOWN, confirm via ENTER):
Settings (bold = factory setting)
Display Reverse =
Display Backlight =
DMX Fail =
Dimmer Curve =
Dimmer =
Response
10
Mode
Slave
Flips the display
Display and control field
illumination
operating mode if DMX signal
is lost
Dimmer Curve
Dimmer behavior
On Display rotates by 180° (such as when installed
overhead)
Off No rotation of display
On permanently on
Off deactivates after approx. 30 seconds of inactivity
Hold last command is held
Blackout activates Blackout
Linear The light intensity climbs linearly
with the DMX value
Exponential The light intensity can be set finely in the lower DMX
value range and roughly in the upper DMX value
range
Logarithmic The light intensity can be set roughly in the lower
DMX value range and finely in the upper DMX value
range
S-curve The light intensity can be set finely in the lower and
upper DMX value ranges and roughly in the medium
DMX value range
LED
The spotlight reacts abruptly to changes in the DMX
value.
Halogen The spotlight behaves similar to a
halogen spotlight with soft changes in brightness