Dmx Address - Cameo ZENIT Z180 G2 Bedienungsanleitung

SETTING THE DMX START ADDRESS (DMX Address)
Access the selection menu by pressing MODE. Now select the "DMX Address" option using UP and DOWN (note arrow) and then press
ENTER. Now select the desired DMX start address again using UP and DOWN and confirm via ENTER (the highest value depends on the
selected DMX mode). The last selected DMX mode will activate at the same time.
---------------- Menu ----------------
 DMX address
DMX mode
Stand Alone
Slave
Settings
System Information
SETTING DMX MODE (DMX Mode)
Access the selection menu by pressing MODE. Now select the "DMX Mode" option using UP and DOWN (note arrow) and then press ENTER.
You can now select the desired DMX mode using UP and DOWN and then confirm via ENTER. You can find detailed DMX tables in these
instructions under "DMX CONTROL".
---------------- Menu ----------------

DMX address

 DMX mode
Stand Alone
Slave
Settings
System Information
SETTING STAND ALONE MODE (Stand Alone)
Access the selection menu for device settings by pressing MODE (--- Menu ---). Using the UP and DOWN control keys, now select the
"Stand Alone" menu option (note arrow) and confirm via ENTER. In the submenu, you can now select between the standalone modes of
Auto, Color Macro, Static, Tunable White, and User Color via UP and DOWN. Confirm your selection with ENTER.
---------------- Menu ----------------
DMX address
DMX mode
 Stand Alone
Slave
Settings
System Information
001
-
DMX address
5xx
001
------------- DMX Mode -----------
 3 CH
4 CH
5 CH
9 CH
10 CH
11 CH
17CH
------------- Stand Alone -----------
 Auto
Static
Color Macro
Tunable White
User Color
7