Caring For And Cleaning The Battery Indicator - Dometic ENERGY & LIGHTING SINEPOWER PerfectCharge MCP1204 Bedienungsanleitung

Caring for and cleaning the battery indicator

Installing the wall bracket
Install the wall bracket as follows (fig. 5, page 5):
➤ Attach the wall bracket (1) to the installation location you chose.
➤ Attach the adapter (2) to the battery charger (3).
Storing the battery charger
Store the battery charger as follows (fig. 5, page 5):
➤ Push the battery charger (3) along with the adapter into the cone-shaped
brackets from above.
To release it, lift the battery charger upwards out of the brackets.
8.2 Using the battery charger with a battery indicator
I
NOTE
Notes on connection battery chargers to the battery indicator and on
using the battery indicator can be found in the installation and operating
manual for the battery indicator.
➤ Connect the battery charger to the battery indicator.
➤ Use the battery charger as described (see chapter "Using the battery charger" on
page 17).
9 Caring for and cleaning the battery
indicator
A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
18
PerfectCharge MCP1204/1207
EN