Atlantic ODYSSEE SPLIT V2 Bedienungsanleitung Seite 12

Warnings
1.2. Installation site of the water heater version 270 l
Floor bearing capacity:
Area required:
Height underneath the ceiling:
Recommended installation site: •
655
1.3. Installation site of the water heater version 200 l
Type of wall bearing
the suspended water
heater:
(the mounting template
has been printed on the
package)
Area required:
Height underneath the
ceiling
Recommended installa-
tion site:
Installation in a cupboard
12
Presentation
• Load capacity of at least 400 kg for the surface
area bearing the water heater
• 655 x 650 (l x d), see below figures
• > 1.70 m
In heated rooms
588
588 without
safety device
650 recommended
• Rather thin walls (of type drywall): Threaded pins of Ø
10mm, penetrating the wall and connected by profiles or
counter plates.
• Thick solid walls (concrete, stone, brickwork): Anchor bolts
of Ø 10mm or drill holes for dowels of type MOLY Ø 10mm.
• If the wall the device is mounted onto is not capable of bea-
ring the respective weight, the device can be put on a rack.
It is absolutely necessary to affix the upper bracket. Please
use the rack recommended by the manufacture.
• 588 x 603 (l x d), see below figures
• 588 x 600 (l x d) when installed on a universal tripod. See
diagram below for integration in a closet.
• > 1.65 m
• In heated rooms
Optimized installation in a closet
with stirrups
603
588
Installation
604
without safety device
with universal tripod
600
588