Replacement Of Knives; Change Of Oil In Gearbox - LELY SPLENDIMO L Serie Betriebsanleitung

Replacement of knives

7.4
The mower knives come in 2 different versions for discs with LH or
RH rotation. The front of the cutting edge has to point downward,
viewed in the direction of rotation of the disc (fig. 21).
The mower knives have two cutting edges. After one edge is worn,
the knife can be reversed so that the second edge can be used.
- Knives should always be replaced in pairs in order to keep the disc
balanced.
- Replace worn or damaged nuts and knife bolts.
- Use new, self-locking nuts and tighten them with a torque of 50-
60 Nm (5-6 kgm).

Change of oil in gearbox

7.5
Change the oil of the gearbox of a new mower (or after assembly of
a new gearbox) after approx. 30 working hours for the first time.
After that, oil has to be changed every 250 working hours.
- Fold up the cutter bar.
- Drain the oil by unscrewing the drain plugs from the side of the
gearbox.
- Fold the cutter bar down on a level floor.
- Fill the cylindrical part A (fig. 22) of the gearbox up to the rim of
the bottom opening for draining/filling.
(Contents: 0,4 l transmission oil; GX85W-140).
- Fill the straight part B up to the level between the minimum/
maximum indication on the dipstick.
Contents: 0,4 l transmission oil GX85W-140.
An incorrect oil quantity may lead to overheating and
!
unrepairable damage of the gearbox and/or the drive element.
Change the oil more often when operating the machine in
exacting conditions.
E-16
50-60 Nm
(5-6 kgm)
A: 0,4 l
B: 0,4 l
21
22