Dismounting From The Tractor - LELY SPLENDIMO L Serie Betriebsanleitung

Should the cutter bar hit an obstacle during mowing, it can move
backward thanks to the extension of the breakback device (fig. 11).
- After extension of the breakback device: drive backwards a few
meters until the breakback device has locked back into position.

6 DISMOUNTING FROM THE TRACTOR

- Lower the cutter bar.
- Set the parking jack in the lowest position.
- Lower the 3-point hitch until the parking jack is supported by the
ground.
- Switch off the tractor engine. Disengage the PTO shaft from the
tractor PTO.
- Place the PTO shaft in the hook (fig. 12).
- Depressurize the hydraulic system and disconnect the hydraulic
hose. Slide the dust cap onto the plug.
- Remove the control cord for the locking hooks from the tractor
cab.
- Disengage the top link from the machine.
- Uncouple the lower arms from the machine.
E-12
11
12