Steinbach APPcontrol Originalbetriebsanleitung Seite 42

Manual mode
The manual mode is used to manually control the movements of the device. Movement
starts with a delay because the pump has to start up first.
Connection status
See "Start menu".
Start menu
2
Return to the start menu.
Forward
3
Moves the device forwards until another
button is pressed.
The LED indicator of the Mode function on
the control unit blinks from left to right.
Left
4
Turns the device counter-clockwise for as
long as the button is pressed.
The LED indicator of the Time function on
the control unit blinks from right to left.
Reverse
5
Moves the device backwards until another button is pressed.
The LED indicator of the Mode function on the control unit blinks from right to left.
Right
6
Turns the device clockwise for as long as the button is pressed.
The LED indicator of the Time function on the control unit blinks from left to right.
Stop
7
Stops the movement.
42
1
E
2
3
4
5
1
7
6