Manual Adjustment; Electronic Adjustment; Use Of Dishwasher Salt - AEG FAVORIT 88040VI Benutzerinformation

54

Use of dishwasher salt

Manual adjustment

Turn the water hardness dial to the position 1 or
2 (refer to the table).

Electronic adjustment

1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C until the indicator lights of function but-
tons A, B and C start to flash.
4. Release function buttons B and C.
5. Press function button A.
– The indicator lights for function buttons B and C go off.
– The indicator light for function button A continues to flash.
– The display shows the current adjustment.
– The intermittent audible signals tell the current adjustment.
Example: the display shows
6. Press the function button A again and again until the display shows the necessary
adjustment.
7. Press the on/off button to keep the operation.
If the water softener is set electronically to the level 1, the salt indicator light stays off.
USE OF DISHWASHER SALT
How to fill the salt container:
1. Turn the cap counterclockwise and open
the salt container.
2. Fill the salt container with 1 litre of wa-
ter (only for the first time you fill with
salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from the
salt container when you fill it with salt.
/ 5 intermittent audible signals = level 5.