Herunterladen Inhalt Inhalt Diese Seite drucken

Display; Delay Start Button; Programme Selection Buttons; Extra Silent Programme Button - AEG FAVORIT 88040VI Benutzerinformation

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1)
Rinse aid
End-of-programme
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a
washing programme operates.

Display

The display shows:
• The electronic adjustment of the level of the water softener.
• Activation/deactivation of the rinse aid dispenser (only with multitab function on).
• The number of the washing programme.
• Remaining time to the end of the washing programme.
• The end of a washing programme. The display shows a zero.
• Remaining time to the end of the delay start.
• Fault codes.
• Activation/deactivation of the audible signals.

Delay start button

Use this button to delay the start of the washing programme with an interval between 1
and 24 hours. Refer to 'Select and start a washing programme'.

Programme selection buttons

With these buttons you can select the washing programme (not the Extra Silent washing
programme). Press one of the buttons again and again until the display shows the num-
ber of the necessary programme.
To select the Extra Silent washing programme, press the related button.
Refer to 'Washing programmes' for more data about the washing programmes.

Extra silent programme button

This is a washing programme that operates with a low level of noise.
During the Extra Silent the pump works at a very low speed. This to decrease the level of
noise of 25% compared to the declaration programme. Because of this the programme
has a very long time duration.
Set this washing programme in times when the power rate is more economical.

Multitab button

Press this button to activate/deactivate the multitab function. Refer to 'Multitab function'.

Cancel button

With this button you can cancel a washing programme or a delay start. Refer to 'Select
and start a washing programme'.

Function buttons

Use the function buttons for these operations:
Indicator lights
It comes on when it is necessary to fill the rinse aid container. Refer to
'Use of detergent and rinse aid'.
It comes on when the washing programme is completed.
51
Control panel

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis