Manual Adjustment; Electronic Adjustment - AEG FAVORIT 34030VI Benutzerinformation

24 www.aeg.com
German
degrees
(°dH)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.

Manual adjustment

Electronic adjustment

1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to 'SETTING
AND STARTING A PROGRAMME'.
3. Press and hold the programme but-
ton until the programme indicator (A)
starts to flash and the programme in-
dicator (B) comes on.
4. Wait until the programme indicator
(B) goes off and the end indicator
starts to flash (the programme indica-
tor (A) continues to flash).
Water hardness
French mmol/l
degrees
(°fH)
91 - 125 9.1 - 12.5
76 - 90 7.6 - 9.0
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
Clarke
degrees
64 - 88
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
Turn the water hardness dial to the posi-
tion 1 or 2.
5. Press the programme button.
• The end indicator flashes intermit-
tently. The number of flashes
shows the level of the water soften-
er, e.g. 5 flashes + pause + 5 flash-
es = level 5.
6. To adjust the level of the water soft-
ener, press the programme button.
Each time you press the programme
button you go to the next level.
7. Deactivate the appliance to confirm
the setting.
Water softener
adjustment
Manual Elec-
tronic
1) 10
2
9
1)
2
1) 8
2
1) 7
2
1) 6
2
1) 1)
2 5
1 4
1 3
1 2
2) 2)
1 1