Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point of interruption.
How to cancel a washing programme or a delay start
If a washing programme or a delay start has not started, you can change the selection.
When a washing programme or a delay start are in progress, it is not possible to change
the selection. It is necessary to cancel the washing programme or the delay start to make
a new selection.
When you cancel the delay start, this automatically cancels the selected washing pro-
gramme. You have to select the washing programme again.
1. Press and hold the cancel button until the display shows two horizontal bars.
2. Make sure that there is detergent in the detergent dispenser before you start a new
washing programme.
At the end of the washing programme
• The appliance stops automatically.
• The audible signals operate.
1. Open the appliance door.
– The display shows 0.
– The end-of-programme indicator light is on.
2. Switch off the appliance.
3. For better drying results, keep the door ajar for some minutes.
Auto Off
The Auto Off function automatically switches off the appliance 10 minutes after the end
of the washing programme.
This helps to decrease energy consumption.
Remove the load
• Let the dishes become cold before you remove them from the appliance. Hot dishes
are easily damaged.
• First remove the items from the lower basket, then from the upper basket.
• There can be water on the sides and door of the appliance. Stainless steel becomes
cool more quickly than the dishes.
CARE AND CLEANING
To remove and clean the filters
Dirty filters decrease the washing results. Although the maintenance is very low with
these filters, we recommend that you make a check at intervals and if necessary, clean
them.
Care and cleaning
59
Werbung
Kapitel
Inhaltsverzeichnis
