Manual Adjustment; Electronic Adjustment - AEG FAVORIT45002MO Benutzerinformation

24 www.aeg.com
German
degrees
(°dH)
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soft-
ener manually and electronically.

Manual adjustment

Electronic adjustment

The appliance must be in setting
mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
1. Make sure that the programme mark-
er on the programme knob is aligned
with the off position.
2. Press and hold Multitab. At the same
time turn the programme knob coun-
terclockwise until the programme
marker is aligned with the first pro-
gramme on the control panel.
Water hardness
French mmol/l
degrees
(°fH)
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
Clarke
degrees
23 - 27
18 - 22
13 - 17
5 - 12
< 5
Turn the water hardness dial to the posi-
tion 1 or 2.
3. Release Multitab when the display
shows the setting of the water soften-
er.
• Example:
4. Press Multitab again and again to
change the setting.
5. To confirm the setting, turn the pro-
gramme knob until the programme
marker is aligned with the off posi-
tion.
Water softener
adjustment
Manual Elec-
tronic
1) 1)
2 5
1 4
1 3
1 2
2) 2)
1 1
= level 5.