COMMISSIONING - GENERAL DETAILS
The standard power source is designed for a mains voltage of
3x400V / 50Hz. For unusual voltages (for example 500V) a
Fronius ancillary autotransformer must be used. There is no
need to take the phase sequence into account when wiring
up.
Caution! The fitting of mains plugs, or any other electrical
jobs on the unit, should only be undertaken by QUALIFIED
ELECTRICIANS.
ELECTRIC CONNECTION TA 150
PLI 3
6pole terminal strip 1/2/3/4
for RDS contactors
Fig. 2
Short-circuiting
Plasma current cable
12
Analog and digital
interface cables
RDS contactors
control cable
Mains cable 4x 10mm
2
Mains terminal L1/L2/L3/PE
(no phase sequence)