Gemü 566 Betriebsanleitung Seite 98

12 Specific data IO-Link (pin 6)
12.4.35 Set value (W) input
The function of the analog input can be set with the Set value (W) input parameter.
In- Sub Off- Access
dex - set Rights
In-
dex
0xB8 1 0 R/W
2 8 R/W
3 16 R/W
4 24 R/W
5 32 R/W
Description of parameter values
Index name
Set value (W) input
GEMÜ 566
Lengt Index name
h
Set value (W) in-
1 bit
put
2 bits
8 bits
8 bits
8 bits
Parameter Values
Direction 0
1
Type 0
1
2
I min 0 to 40
(0 to 4.0 mA)
I max 200 to 220
(20.0 to 22.0
mA)
U max 100 to 110
(10.0 to 11.0 V)
Parameter Type
Direction uint:1
Type uint:2
I min uint:8
I max uint:8
U max uint:8
Specify direction of the set value input.
0 = Rise (rising)
1 = Fall (falling)
Determine signal input.
0 = 0 to 20 mA
1 = 4 to 20 mA
2 = 0 to 10 V
Determine minimum value of the current input. If the set
value is not reached, the message "Set value too small" is
issued.
Determine maximum value of the current input. If the set
value is exceeded, the message "Set value too high" is
issued.
Determine maximum value of the voltage input. If the set
value is exceeded, the message "Set value too high" is
issued.
98 / 112
Default Values
0 0
1
1 0
1
2
35 0 to 40
(0 to 4.0 mA)
205 200 to 220
(20.0 to 22.0 mA)
103 100 to 110
(10.0 to 11.0 V)
Description
www.gemu-group.com