Gemü 566 Betriebsanleitung Seite 85

12.4.9 Product ID
The product ID can be read out in ASCII format with the Product ID parameter.
In- Sub Off- Access
dex - set Rights
In-
dex
0x13 0 0 RO
12.4.10 Serial number
The serial number of the device can be read out with the Serial number parameter.
The serial number consists of an 8-digit completion confirmation number, a forward slash and a 4-digit index.
In- Sub Off- Access
dex - set Rights
In-
dex
0x15 0 0 RO
12.4.11 Hardware revision
The circuit boards' version can be read out with the Hardware revision parameter.
The hardware version is displayed with the 2-digit version number of the basic assembly and the 2-digit version number of the
OPEN/CLOSED or positioner assembly.
In- Sub Off- Access
dex - set Rights
In-
dex
0x16 0 0 RO
12.4.12 Firmware revision
The software version can be read out with the Firmware revision parameter.
In- Sub Off- Access
dex - set Rights
In-
dex
0x17 0 0 RO
12.4.13 Application specific tag
A text with 32 characters can be stored in the device with the Application specific tag parameter.
For example, installation location, function, installation date, etc.
In- Sub Off- Access
dex - set Rights
In-
dex
0x18 0 0 R/W
www.gemu-group.com
Length Index name
Product ID
18 byte
Length Index name
Serial number
13
bytes
Length Index name
Hardware revision
10
bytes
Length Index name
Firmware revision
21 byte
Length Index name
Application
32
specific tag
bytes
Parameter
Parameter
Parameter
Parameter
Parameter
85 / 112
12 Specific data IO-Link (pin 6)
Type Values
StringT "eSyStep Positioner"
Type Values
StringT "XXXXXXXX/YYYY"
Type Values
StringT "Rev. XX/XX"
Type Values
StringT "V X.X.X.X"
Type Values
StringT „**************** "
GEMÜ 566