Gemü 566 Betriebsanleitung Seite 94

12 Specific data IO-Link (pin 6)
12.4.27 Calibration positions
The values of the factory calibration can be read out with the Calibration positions parameter.
The values are analog values of the potentiometer in the mechanical end positions of the actuator.
In- Sub Off- Access
dex - set Rights
In-
dex
0x55 1 0 RO
2 16 RO
Description of parameter values
Index name
Calibration positions
12.4.28 Analog values
Different analog values can be read out with the Analog values parameter.
In- Sub Off- Access
dex - set Rights
In-
dex
0x60 1 0 RO
2 16 RO
3 32 RO
4 48 RO
Description of parameter values
Index name
Analog values
GEMÜ 566
Lengt Index name
h
Calibration
12
positions
bits
12
bits
Parameter Values
Max. 0 ... 4092
Min. 0 ... 4092
Length Index name
Analog values
12 bits
12 bits
12 bits
12 bits
Parameter Values
Potentiometer 0 ... 4095
Supply voltage 0 ... 4095
Temperature 0 ... 4095
Set value (W) 0 ... 4095
Parameter Type
Max. uint:16
Min. uint:16
Read out analog value of the potentiometer for the
mechanical end position OPEN.
Read out analog value of the potentiometer for the
mechanical end position CLOSED.
Parameter
Potentiometer
Supply voltage
Temperature
Set value (W)
Read out current analog value of the potentiometer.
Read out current analog value of the supply voltage.
Read out current analog value of the temperature sensor.
Read out current analog value of the set value.
94 / 112
Default Values
0 0 ... 4092
4092 0 ... 4092
Description
Type Values
uint:16 0 ... 4095
uint:16 0 ... 4095
uint:16 0 ... 4095
uint:16 0 ... 4095
Description
www.gemu-group.com