Electrical Connection - Kaiser KCT 6395 I-Serie Gebrauchsanweisung

220 – 240 V • 2 + 2N~
for KCT 34... only this method
8
Downloaded from www.Manualslib.com
400 V • 2N~
220 – 240 V
220 – 240 V 400 V
N L2
220 – 240 V
220 – 240 V
N2 N1 L2
220 – 240 V~
220 – 240 V
N L
manuals search engine

ELECTRICAL CONNECTION

Before connecting the cooking hob to the mains power
supply, make sure that:
• the plant characteristics are such as to follow
what is indicated on the matrix plate placed at the
bottom of the working area,
• the mains supply has an efficient ground
connection complying with all applicable laws
and regulations.
Correct grounding is a legal requirement. If the
appliance is not pre-fitted with a power cable and/ or
L1
plug, use only suitable cables and plugs capable of
handling the power specified on the appliance's data
plate and capable of resisting heat. The power cable
should never reach a temperature 50 °C above ambient
temperature at any point along its length.
If the appliance is to be connected directly to mains
terminals, fit a switch with minimum aperture of 3 mm
between the contacts. Make sure that the switch is of
sufficient capacity for the power specified on the
appliance's data plate, and compliant with applicable
regulations. The switch must not break the green-
yellow earth wire. The socket or switch must be easily
reachable with the cooking hob fully installed.
L1
Attention! Do not use the appliance if the power
cable is damaged, if the cooking hob does not
function correctly or if it has been damaged or
dropped. Contact the customer service.
Attention! This cooking hob is exclusively for
domestic use! Use the oven only for preparing
meals.
Attention! The manufacturer declines all
responsibility for damage or injury if the above
instructions and normal safety precautions are not
respected.
EN