Symbols Used - Schwamborn WDS 530 Originalbetriebsanleitung

EN Wall and ceiling grinding machine WDS 530 C
1 Important information
Key to the illustrations
Pos Fig. Designation
39 P/S ETX locating plate
40 Q Screw
41 Q 3 x Milling drum
42 Q Drum mount
43 R Gear disc
44 R Cover
45 S 3 x Recess
46 U Special dust cover ring
47 Z Cover
48 AA Controller,
49 AA Controller,
50 AB Contact pressure display (bar)
51 AD 3 x Drive plate
52 AD 3 x Screw
53 AD/AE Clamping screw
54 AD/AE Star grip
55 AE Spanner
1
) Not included in scope of delivery /
1 Important information
The grinding machine may be used only with the ac‐
cessories supplied by the manufacturer of the grin‐ ding
machine for stripping and grinding of even, vertical wall
surfaces or even, horizontal ceiling surfaces such as:
— cement
— natural stone
— plaster
— residual adhesive or filling compound
— paint
Any other use of the grinding machine can lead to
endangerment and is prohibited!
To ensure proper use of the machine, follow the in­
structions in the operating manual, paying particular
attention to any warnings and instructions relating to
operation and maintenance!
Before using the grinding machine,
the operating personnel must carefully
read and understand this operating
manual!
Keep this operating manual close at
hand for easy reference!
Read and observe operating manuals for the guiding
machine provided by suppliers!
If the grinding machine is loaned to other parties, the
operating manual needs to be provided with the
machine and its importance must be made clear!
20
2
)
2
)
2
)
2
)
wall contact pressure
ceiling contact pressure
1
)
2
) accessories

1.1 Symbols used

The following symbols are used in this
documentation:
Safety instructions
This symbol indicates warnings, prohibitions and
instructions regarding potential hazards. These
instructions must be obeyed and closely
observed.
Some safety instructions are accompanied by
corresponding symbols.
Warning
Additional information
This symbol indicates additional information.
1.2 Copyright, liability and warranty
 Schwamborn Gerätebau GmbH
All rights, including those pertaining to translation, lie
with Schwamborn Gerätebau GmbH.
Any reproduction, use or distribution of this original
operating manual or its translations, in whole or in
part, is prohibited without the express written permis­
sion of Schwamborn Baumaschinen GmbH.
Liability or warranty is excluded if:
— The instructions in the operating manual have
not been observed.
— The grinding machine or its attachments were
improperly operated.
— The maintenance was carried out inadequately
or incorrectly.
— Specified spare parts were not used.
— The protective equipment was not used, has
been altered or was removed.
— The specified power supply ratings and sur­
rounding conditions have not been observed.
— The tool speed has been set too high (!
Page 24).
— An unsuitable dust extraction has been used.
The manufacturer is not liable for any damage that
may result if the user makes any changes to the
grinding machine without the permission of
Schwamborn Gerätebau GmbH. Any such actions
will void the warranty.
Prohibition
Direction