Important Information; Intended Use; Liability And Warranty; Symbols Used - Schwamborn DSM 400 Originalbetriebsanleitung

EN Floor grinding machine DSM 400

1 Important information

1 Important information
Before using the machine, the operat­
ing personnel must carefully read and
understand this operating manual!
Keep this operating manual close at
hand for easy reference!
Read and observe documents and operating manuals
provided by suppliers!
If the machine is on loan to other parties, the operat­
ing manual needs to be provided with the machine
and its importance must be made clear!

1.1 Intended use

The machine may be used only with the accessories
supplied by the manufacturer for stripping, wet grind­
ing, and dry grinding of even, level floor surfaces
such as:
— Cement
— Screed
— Natural stone
Any other use of the machine can lead to dangerous
situations and is prohibited!
Risk of damage!
The machine may not be used for milling bitu­
men surfaces (e.g. roads, footpaths)!
Bitumen can adhere to the rotor, the housing
and the suction nozzle.
To ensure correct use of the machine, follow the in­
structions in the operating manual, paying particular
attention to any warnings and instructions relating to
operation and maintenance!

1.2 Liability and warranty

Liability or warranty is excluded if:
— The instructions in the operating manual
have not been observed.
— The machine or its attachments were im­
properly operated.
— The maintenance was carried out inade­
quately or incorrectly.
— Specified spare parts were not used.
— The protective equipment was not used,
has been altered or was removed.
— The specified power supply ratings and
surrounding conditions have not been ob­
served.
— Unsuitable tools have been used.
— An unsuitable dust extraction has been
used.
The manufacturer is not liable for any damage that
may result if the user makes any changes to the ma­
chine without the manufacturer's permission. Any
such actions will void the warranty.

1.3 Symbols used

The following symbols are used in this
documentation:
Safety instructions
This symbol indicates warnings, prohibitions and
instructions regarding potential hazards. These
instructions must be obeyed and closely
observed.
Some safety instructions are accompanied by
corresponding symbols.
Warning
Additional information
This symbol indicates additional information.
2 Safety
This chapter contains a summary of the most impor­
tant information on safety when handling the ma­
chine.

2.1 Accident prevention and safety

The following instructions comply with legislation, di­
rectives and publications such as:
— EC Machinery Directive
— EC Product Liability Directive
— Law on technical materials
— Law on equipment safety
— Law on product liability
This operating manual is intended for operators and
tool setters, as well as for the personnel that service,
maintain and repair the machine. Together with all
the technical documentation, it is intended to help
— avoid hazardous situations
— use as intended
— avoid downtime and repair costs
— maintain the function of the machine
— increase the service life of the machine
The manufacturer and owner of the machine must
observe the contents and provisions of the EC direc­
tives. The effectiveness of any measure ultimately
Prohibition
Direction
15