Display; Errors - SoFlow SO4 Originalbetriebsanleitung

4.2 Display

You will find the following information on the display on the handlebar:

Light status

Battery status

real Time speed

Distance

Error codes

Bluetooth status

4.3 Errors

The control electronics of your SO4 / SO4 PRO continuously checks the correct function of all important components. If your SO4 / SO4 PRO detects a malfunction, this will be indicated
accordingly on the display. You can display the error code by briefly pressing the start button and the minus button simultaneously:
Error message

E1: Communication failure

E2: Error with the brake

E3: Error with the throttle

E4: Error with the hall sensor

E5: Error with the controller
Stop using SO4/SO4 Pro immediately if the display shows one of these error messages. Switch the unit off and on again. Check the plug connection between the handlebars and the front
bar that no dirt will affect the contacts of the plugs. Make sure that the battery is fully charged. If the error message still persists, contact the SoFlow service at info@soflow.com.
copyright by www.soflow.com 14