Permanently Saving The Additional Weight (Pt) - Seca 677 Bedienungsanleitung

Permanently saving the
additional weight (Pt)
Downloaded from www.Manualslib.com
Using the Pre-tare function, you can permanently save
an additional weight and automatically deduct it from a
measurement result. For example, you can save an all-
inclusive weight for shoes and clothing and then always
deduct this from the measurement result if a patient is
weighed fully-clothed.
The device has three memories for weights. You can
save various weights and call them up individually
depending on the initial situation, so that they are auto-
matically deducted from the measurement result.
1. Select the item "Pt" from the menu.
2. Confirm your selection.
3. You can adopt the memory displayed or select a
2
PT
4. Confirm your selection.
5. You can adopt the saved value or amend it using
6. Confirm your selection.
7. Ask the patient to position him or herself on the
8. To deactivate the function, select the item "Pt" from
9. Confirm your selection.
manuals search engine
The message "Pt" appears.
The last memory used is displayed.
different memory.
Arrows flash in the display.
The additional weight saved to the selected
memory is displayed.
the arrow keys.
NOTE
When you enter the value "0", the function is
switched off. The message "Pt" is no longer
displayed.
scale.
The patient's weight is displayed.
The saved additional weight has been deducted
automatically.
the menu again.
The function is deactivated.
You exit the menu automatically.
NOTE
When you switch the scale off, the function is
switched off. The message "Pt" is no longer
displayed when you switch the scale on again.
Before you really get started ... • 75
English