Assembling The Display Housing; Final Steps - Seca 677 Bedienungsanleitung

Assembling the display
Downloaded from www.Manualslib.com
1. Take the display cable out of the fixing in the railing.
housing
2. Connect the display cable in the railing to the cable
3. Push the cable carefully into the railing.
4. Place the display housing on the railing.
5. Ensure that the bores on the display housing and
6. Screw the display housing firmly to the railing.

Final steps

1. Ensure that all parts are correctly located.
2. Ensure that all screws are fully tightened.
manuals search engine
of the display housing.
3 x B 3.5 x 9.5
the bores in the railing are in line over one another.
Before you really get started ... • 65
English
Display cable