Permanently Saving The Additional Weight (Pt) - Seca 656 Bedienungsanleitung

Permanently saving the
additional weight (Pt)
PT
Sto 1 (Weight)
Sto 2 (Weight)
Sto 3 (Weight)
Net Weight
2
82 •
This function is suitable for patients who are not mobile
and who will have to be weighed in a wheelchair, for
example. You can save the tare weight of the wheel-
chair independently of a weighing operation. You can
call up the tare weight of the wheelchair during the
weighing operation and have it deducted from the
measured result automatically.
The device has three memories for weights. You can
save various weights and call them up individually
depending on the initial situation, so that they are auto-
matically deducted from the measurement result.
1. Select the item "Pt" from the menu.
The message "Pt" appears.
2. Confirm your selection.
The last memory used is displayed.
3. You can adopt the memory displayed or select a
PT
different memory.
4. Confirm your selection.
Arrows flash in the display.
The additional weight saved to the selected
memory is displayed.
5. You can adopt the saved value or amend it using
the arrow keys.
NOTE
When you enter the value "0", the function is
switched off. The message "Pt" is no longer
displayed.
6. Confirm your selection.
7. Wheel the patient onto the scales.
The patient's weight is displayed.
The saved additional weight has been deducted
automatically.
8. To deactivate the function, select the item "Pt" from
the menu again.