Set The Time (Time) - Seca 677 Bedienungsanleitung

Set the time (Time)

Downloaded from www.Manualslib.com
2. Select the "APrt' menu item from the "rf" submenu
3. Select the setting relevant for your device
4. Confirm your selection.
You can configure the system so that the wireless
printer automatically adds a date and time to your
measurement results. To do this, you have to set date
and time once on this device and transmit it to the
internal clock of the wireless printer.
1. Switch on the device.
2. Select the "Time" menu item from the "rF"
3. Confirm your selection.
4. Set the correct year.
5. Confirm your selection.
6. Repeat steps 3. and 4. accordingly for "month"
7. Confirm each of your selections.
manuals search engine
and confirm your selection.
combination:
– HI: measurement results from length
measuring devices
– MA: measurement results from scales
– HI_MA: measurement results from length
measuring devices and scales
– off: no automatic printing, printing only possi-
ble by pressing and holding the Enter key
during the weighing procedure.
You exit the menu automatically.
NOTE
This function is only accessible if a
seca wireless printer has been integrated in the
wireless group via the "learn" function.
submenu.
The current setting for "Year" is displayed.
(Mon), "day" (dAy), hour (hour) and minute (Min).
After confirming the setting for minute, you
automatically exit the menu.
The settings are automatically transmitted to the
wireless printer.
The wireless printer automatically adds a date and
time to every printout.
NOTE
Follow the instructions for use for the wireless
printer for further information about operating it.
The seca 360° wireless network • 83
English