Pelgrim IDK664 Anleitung Seite 60

60
installation
Installation of the induction hob above a combimicrowave oven, a 90 cm
Pelgrim oven or an oven of a different brand
Saw out the ventilation opening(s) (1),
making sure that the total surface of
the holes is a minimum of 100 cm
See the drawing, for example, showing
2 holes.
Fit a protective plate (2) between the
oven and the hob. The plate should be
at least 10 mm thick and heat-resistant
(85 °C). The space between the
underside of the hob and the
protective plate must be at least
50 mm.
Ventilation is via the adjoining
cupboards.
Install the appliance in such a way that the power plug remains accessible
always.
.
2
min.
560 x 3 mm
49