Pelgrim IDK664 Anleitung Seite 41

41
use
Overheatingprotection
The appliance may become overheated if:
the pan does not conduct the heat adequately;

fat or oil is heated at a high setting;

there is insufficient circulation of air (see also ventilation protection in the

installation part of this manual).
In the event of overheating the result will be that the cooking zone in question
or all the cooking zones will display one of the following reactions:
the appliance will reduce the power a little;

in case this will not help the appliance will switch off and E2 will appear in

the displays.
If the appliance has cooled down sufficiently, E2 will disappear and you can
switch the appliance on again.
Prevent the overheating protection becoming activated by:
using pans that are good conductors of heat;

heating up fat or oil at a lower setting;

making sure there is sufficient ventilation.

If, despite the above-mentioned measures having been taken, the overheating
protection becomes activated again, contact the service department or a
professionally qualified specialist.