Pelgrim IDK664 Anleitung Seite 58

58
installation
Ventilation
The electronics in the appliance require
cooling. The ventilation openings
are located on the underside of the
appliance. It must be possible for
cool air to be drawn in through these
openings. The appliance is fitted
with outlet openings at the front and
bottom.
The kitchen unit will require a few modifications to allow optimum cooling of
the hob.
Above drawer or fixed panel
Saw out the ventilation openings
(min. 100 cm ). Ventilation is via plinth
2
and rear of cupboard.
Do not allow the ventilation openings
on the underside of the appliance to
be blocked by a drawer.
Where there is a drawer, a gap of at
least 560 x 3 mm should be made at
the front. The distance between drawer
A and the hob should be a minimum of
10 mm.
No extra modifications for ventilation
need be made where there is a fixed
panel.
min.
10 mm
150
min.
560 x 3 mm
A