ASROCK FM2A88M Pro3+ Handbuch Seite 11

Step 2.
Step 3.
Step 4.
2.2 Installation of CPU Fan and Heatsink
Downloaded from www.Manualslib.com
Position the CPU directly above the
socket such that the CPU corner with
the golden triangle matches the socket
corner with a small triangle.
Carefully insert the CPU into the
socket until it its in place.
The CPU its only in one correct
orientation. DO NOT force the CPU
into the socket to avoid bending of
the pins.
When the CPU is in place, press it
irmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
After you install the CPU into this motherboard, it is necessary to install a
larger heatsink and cooling fan to dissipate heat. You also need to spray
thermal grease between the CPU and the heatsink to improve heat dis-
sipation. Make sure that the CPU and the heatsink are securely fastened
and in good contact with each other. Then connect the CPU fan to the
CPU FAN connector (CPU_FAN1, see Page 2, No. 2). For proper instal-
lation, please kindly refer to the instruction manuals of the CPU fan and
the heatsink.
manuals search engine
FM2A88M Pro3+
11