struers LaboPress-3 Gebrauchsanweisung Seite 15

Pos. No. Key/Knob
MAIN
SWITCH
POWER
POWER
s
START
o
STOP
O
RAM
UP
N
RAM
DOWN
f
FORCE
¹
HEAT
LaboPress-3
Instruction Manual
Function
Turns the main power of the machine
on/off. The main switch is located to
the right of the cabinet.
Lights up when the main power is on.
Starts the automatic mounting
process.
Stops the mounting process,
followed by automatic release of
pressure. Stops the movement of the
lower ram.
Starts the upward movement of
lower ram. When started: stops the
upward movement of the lower ram.
The ram automatically stops when
the upper limit is reached.
Starts the downward movement of
lower ram. When started: Stops the
downward movement of the lower
ram. The ram automatically stops
when the lower limit is reached.
Adjustable knob for setting the force
(pressure).
Adjustable knob for setting the
heating time.
Pos. No. Key/Knob
¹
HEATING
INDICATOR
180°C
HEATING
1
180°C
HEATING
INDICATOR
2
150°C
HEATING
3
150°C
HEATING
INDICATOR
4
¸
COOLING
5
¸
COOLING
INDICATOR
6
OVERLOAD
OVERLOAD
Function
Lights up when heating is on.
Selects a heating temperature of
180°C.
Lights up when the heating
temperature is set to 180°C.
Selects a heating temperature of
150°C.
Lights up when the heating
temperature is set to 150°C.
Adjustable knob for setting the
cooling time.
Lights up when cooling is on.
Lights up if the motor has been
overloaded.
9