Grundfos DME 60 Montage- Und Betriebsanleitung Seite 32

7. Calibration
It is important that the pump is calibrated after
installation to ensure that the correct value (ml/h or l/
h) appears in the display.
The calibration can be carried out in two different
ways:
• Direct calibration.
The dosed quantity of 100 strokes is measured
directly. See section 7.1 Direct
• Check calibration. See section
calibration.
The pump
performs 100
dosing strokes
Operating display
Fig. 26
32
calibration.
7.2 Check
Operating display
Operating display
without changes
Set value.
See section 7.2