Product Description; Scope Of Delivery - Ottobock BionicLink PC 60X5 Gebrauchsanweisung

The product "60X5 BionicLink PC" is hereinafter referred to as the BionicLink PC or product.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.

2 Product description

2.1 Design
The 60X5 BionicLink PC is equipped with the following light-emitting diodes (LEDs):
2.2 Function
The 60X5 BionicLink PC Bluetooth Adapter enables communication between Ottobock products
with an integrated Bluetooth interface or an external Bluetooth interface (e.g., 60X3 BionicLink)
and the USB port of a PC.
3 Application
3.1 Indications for use
The 60X5 BionicLink PC Bluetooth Adapter is to be used solely for establishing a data connec­
tion between the Bluetooth interface of an Ottobock product and the USB port of a PC.
3.2 Qualification
The product may only be used by persons who have previously been instructed in its proper use.

4 Scope of delivery

• 1 pc. 60X5 BionicLink PC
• 1 pc. Driver CD "USB Drivers"
• 1 pc. 647G506 Instructions for use (qualified personnel)
5 Safety
5.1 Explanation of warning symbols
NOTICE Warning regarding possible technical damage.
5.2 Structure of the safety instructions
NOTICE
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe the safety instruc­
tions. Consequences are presented as follows if more than one consequence is possible:
> E.g.: Consequence 1 in the event of failure to observe the hazard
> E.g.: Consequence 2 in the event of failure to observe the hazard
10
1. A green LED to indicate that the adapter is ready for operation
2. A blue LED to indicate an active Bluetooth connection to the
Ottobock product