Product Description; Intended Use - Ottobock 4R153 Serie Gebrauchsanweisung

1 Product description

INFORMATION
Date of last update: 2020-05-06
► Please read this document carefully before using the product and
observe the safety notices.
► Instruct the user in the safe use of the product.
► Please contact the manufacturer if you have questions about the
product or in case of problems.
► Report each serious incident in connection with the product, in particu­
lar a worsening of the state of health, to the manufacturer and to the
relevant authority in your country.
► Please keep this document for your records.
1.1 Construction and Function
The 4R153 adapter plate or 4R153=1 adapter plate with offset are installed
between the prosthetic socket and the distal components of the modular
prosthesis. They are mounted together with the socket adapter. The adapter
plate features two connectors for generating a vacuum in the prosthetic
socket and one connector for connecting to a vacuum pump. A PE sinter fil­
ter protects the vacuum pump from contamination. Additionally, the adapter
plate is equipped with a check valve, which retains the vacuum generated in
the prosthetic socket.
The adapter plate with offset can be used when a greater lateral clearance to
the prosthetic knee joint or prosthetic foot is required.
1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.

2 Intended use

2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
2.2 Area of application
Approved for a body weight of up to 150 kg.
English
11