English
EX-1184HMV-22
3. Layout, Connections & Jumper Settings
3.3 Jumper Settings
The EX-1184HMV-22 will be delivered with the setting Bus-Power.
But you have the
possibility to cut the power at the data line.
For this you open the case with the four
screws on both sides. Then you must set the jumper JP1 from BUS (Bus-Powered) to
SELF (Self-Powered). See the following picture.
JP1
© Copyright 2019 by EXSYS Vertriebs GmbH. All Rights Reserved
12