Electrolux ehs90270x Benutzerinformation Seite 6

6 electrolux
Switching the STOP+GO function on and
off
The STOP+GO function simultaneously
switches all cooking zones that are switched
Control panel
To switch on
Touch
To switch off
Touch
STOP+GO does not stop the Timer
function.
Using the automatic warm-up function
All cooking zones are equipped with an au-
tomatic warm-up function. When setting a
heat setting using the automatic warm-up
Step
1.
Select warm-up setting
2. Select the desired heat setting be-
tween 1 and 8
The length of time that the automatic warm
up function operates depends on the heat
setting selected.
Heat setting
Using the child safety device
The child safety device prevents unintention-
al use of the appliance.
Heat setting that was previously set (not automatic warm up
function)
Control panel
A
1
2
3
4
5
6
7
8
9
on to the keep warm setting and then back
to the heat setting that was previously set.
Display
STOP+GO locks the whole control panel
except the sensor field
function, the cooking zone switches to full
power for a certain amount of time and then
automatically switches back to the heat set-
ting set.
Display
A
display flashes
The desired heat setting is displayed.
lights up.
A
As long as the display is lit, the appliance is
working at full power.
After the automatic warm-up is completed, the
display goes out.
Length of the automatic warm up [min:sec]
.
A
display
1:00
1:40
4:50
6:30
10:10
2:30
3:30
4:30
---
A