Electrolux ehs90270x Benutzerinformation Seite 5

Switching the appliance on and off
Control panel
To switch on
Touch
To switch off
Touch
After switching on, within approx. 10
seconds a heat setting or a function
must be set, otherwise the appliance au-
tomatically switches itself off.
Setting the heat setting
The control bar is touched where the desired
heat setting is positioned. The heat setting is
shown in the display. Correct to the left or the
right, if necessary. Do not release before the
desired heat setting is reached.
Switching the outside ring on and off
By switching the outside rings on or off, the
effective heating surface can be matched to
the size of the cookware.
Triple cooking zone
To switch on the central ring
To switch on the outside ring
To switch off the outside ring
To switch off the central ring
Double cooking zone
To switch on outside ring
To switch off outside ring
Multi-purpose zone
To switch on outside ring
To switch off outside ring
Locking/unlocking the control panel
The control panel, with the exception of the
"On/Off" sensor field, can be locked at any
To switch on
Touch
To switch off
Touch
When you switch the appliance off, the locking function is automatically switched off.
for 1 second
for 1 second
Sensor panel
Touch for 1-2 seconds.
Touch for 1-2 seconds.
Touch for 1-2 seconds.
Touch for 1-2 seconds.
Sensor field
Touch for 1-2 seconds
Touch for 1-2 seconds
Sensor field
Touch for 1-2 seconds
Touch for 1-2 seconds
Control panel
Display
lights up. The operational readiness indicators of
the individual cooking zones also light up.
goes out. The operational readiness indicators of
the individual cooking zones also go out.
Before an outside ring can be switched
on, the inside ring must be switch on.
time in order to prevent the settings being
changed e.g. by wiping over the panel with a
cloth.
Indicator lights up
Indicator goes out
electrolux 5
Pilot light
lights up
and light up
light goes out
goes out
Pilot light
lights up
goes out
Pilot light
lights up
goes out
Display