Maintenance - Fora COMFORT plus G30a Bedienungsanleitung

Step 2: Connecting to a personal computer.
Connect the cable to a serial port on your computer. With the
meter switched off, connect the other end of the interface
cable to the meter data port. "PC" will appear on the meter
display, indicating that the meter is in communication mode.
Step 3: Data transmission.
To transmit data, follow the instructions provided with the
software. Results will be transmitted with date and time.
Remove the cable and the meter will automatically switch off.
WARNING!
While the meter is connecting to the PC, it will be unable to
perform a blood glucose test.

Maintenance

Battery
Your meter comes with one 3V CR2032 lithium battery.
► Low Battery Signal
The " " symbol appears along with display messages: The
meter is functional and the result remains accurate, but it is
time to change the battery.
The " " symbol appears with E-b, Error and low:
The power is not enough to do a test. Please change the
battery immediately.automatically be switched off.
Low Battery Warning:
When the batteries will soon be exhausted, 2 quick beeps
are announced three times in succession. This warning is
sounded when the meter is switched on.
EN-16