Troubleshooting - Silvercrest SDM 1500 C2 Bedienungsanleitung

Troubleshooting

Programme
The appliance is
not working.
The appliance
produces no steam.
The pump makes
unusually loud
A whitish edge
forms on the fl oor
when the appliance
stops briefl y during
SDM 1500 C2
Downloaded from www.Manualslib.com
Possible causes
The plug is not connected.
The "Steam" button r has
not been pressed.
There is no water in the
The fi lter 7 is blocked.
No steam setting has
There is no water in the
noises.
Lime has collected.
operation.
manuals search engine
water tank 8.
been selected.
water tank 8.
Possible solutions
Connect the appliance to a
mains power socket.
Press the "Steam" button r.
Fill the water tank 8 with
tap water.
Change the fi lter 7.
Use the MODE button e to
select the desired level of steam.
Fill the water tank 8 with
tap water.
Wipe the limescale away with a
damp cloth. If necessary, add a
little descaler onto the cloth.
GB │ MT │
49 ■