Testing The Remote Control - Geberit AQUACLEAN MERA Montageanleitung

EN

Testing the remote control

For the following test steps, weight must be
applied to the WC seat to simulate a user.
The LED on the lateral control panel lights
up blue during this.
Prerequisite
– The remote control is paired with the device.
– The spray shield has been installed.
1
Test the <Shower> button for the anal
shower.
✓ The device performs a shower cycle.
Pressing the <Shower> button again
interrupts the shower cycle.
44
2
Test the <+> and <-> buttons.
✓ During a shower cycle, the spray
intensity can be altered.
3
Test the <left> and <right> arrow keys.
✓ During a shower cycle, the spray arm
position can be changed.
117093592469946123-1 © 04-2020
966.729.00.0(08)