Geberit AQUACLEAN MERA Montageanleitung Seite 46

EN
9
Test the <User profile> 1–4 button. Perform
tests as follows: start the shower procedure.
Adjust the spray arm position. Press the
user profile button.
✓ The spray arm moves back to the factory
setting position.
✓ All buttons are assigned a user profile.
46
Resetting the storage
water heater
If the storage or transport temperature
exceeds 45 °C, the thermal cut-out will be
tripped.
Prerequisite
– The status LED on the lateral control panel
flashes red.
1
Demount front cladding.
117093592469946123-1 © 04-2020
966.729.00.0(08)