Geberit AQUACLEAN MERA Montageanleitung Seite 43

Testing the spray functions
For the following test steps, weight must be
applied to the WC seat to simulate a user.
The LED on the lateral control panel lights
up blue during this.
1
Test the anal shower function.
✓ The device performs nozzle cleaning.
✓ The spray arm extends.
✓ The anal shower begins with both nozzle
openings active.
✓ After completing the shower cycle, the
spray arm retracts.
✓ The device performs nozzle cleaning.
After a complete shower cycle, the device
will require around 2 minutes to bring the
storage water heater back to shower water
temperature. During this time, hot water will
only be available from the rear spray nozzle.
117093592469946123-1 © 04-2020
966.729.00.0(08)
2
Test shower water temperature.
✓ The shower water is noticeably heated
over the entire shower cycle.
3
Test adjustability of spray intensity.
✓ During a shower cycle, the spray
intensity can be altered.
4
Test the Lady shower function.
✓ Lady shower nozzle extends.
✓ The Lady shower function starts.
✓ All nozzle openings are active.
EN
43