Additional Functions; Setting The Switching Outputs And Other Sensor Configurations Via The Menu - SICK PowerProx Small Teach-in Betriebsanleitung

4.2

Additional functions

4.3

Setting the switching outputs and other sensor configurations via the menu

8024108 | SICK
Subject to change without notice
Table 1: Process data structure
Byte
Byte 0 Byte 1
offset
Bit
offset
Distance Distance
Spare Value
to object to object
Integer Integer Unsigned
16 16 Integer 6
Information on the IO-Link functions can be found in the IO-Link photoelectric sensors
operating instructions (available for download from www.sick.com under the device part
number).
As an alternative, the switching outputs can also be set via the menu. Further sensor
configurations can also be performed via the menu. The menu is accessed by briefly
pressing the Set button for < 1 s. Graphic K describes how to navigate within the menu.
NOTE
Entries qn1 and qn2 are only available when the accompanying teaching mode (qc1,
qc2) has been set to 2-point or window mode.
Byte 2
9 8 7 6
Qint.8 Qint.7 Qint.6 Qint.5
CONFIGURATION
Byte 3
5 4 3 2 1
Qint.4 Qint.3 Qint.2 Qint.1 QL2
Boolean
4
0
QL1
9