SICK PLS Bedienungsanleitung

Seite von 346

/ 346
Lesezeichen

Verfügbare Sprachen

Quicklinks

Diese Anleitung herunterladen

P L S

P r o x i m i t y L a s e r S c a n n e r

P L S 1 0 X - 3 1 7

Inhaltszusammenfassung für SICK PLS

Seite 1 P L S P r o x i m i t y L a s e r S c a n n e r P L S 1 0 X - 3 1 7...
Seite 2 Inhalt/Contents Seite: 3–30 Side: 31–58 Páginas: 59–86 Pages: 87–116 Sivut: 117–144 Page: 145–172 : 173–200 Pagina: 201–228 Side: 229–256 Pagina: 257–284 Páginas: 285–312 Sidan: 313–340 Appendix Page: 341–345 DIN E N I SO 9001 Reg. No . 1 9 4 6 2 - 2...
Seite 3 10. Technische Daten PLS 10X-317 ...........20 11. Anhang: Legende zu den Abbildungen .........28 11.1 Remissionsgrade von Objekten ........28 11.2 Maßbilder...............28 11.3 Steckerbelegung ............28 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 4 PLS 10X-317 (Bestell-Nr. 1 022 253) Dieses Gerät ist zertifiziert zur Verwendung als Personenschutzein- richtung und erfüllt bei bestimmungsgemäßem Einsatz die einschlä- gigen Vorschriften. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 5 Gefahrenbereichen) als auch in mobilen Applikationen (Auf- fahrschutz an Fahrzeugen) eingesetzt werden. Die Schutzfelddimensionierung muss nach den Vorgaben der Tech- nischen Beschreibung PLS erfolgen. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 6 Der Arbeitnehmer ist durch Sachkundige einzuweisen. 5. Dieser Broschüre ist als Anlage eine Checkliste zur Überprüfung durch den Hersteller und Ausrüster beigefügt. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 7 Die Kommunikationsleitung zum PLS wird mit einer abgeschirmten Datenleitung hergestellt (siehe Kapitel Zubehör in der Technischen Beschreibung). Bitte beachten Sie die Hinweise auf der folgenden Seite! 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 8 Nur wenn beide Anschlussgehäuse mit Dichtungen auf die beschrie- bene Art eingesetzt und befestigt werden, entspricht das Gehäuse der Schutzart IP 65. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 9 Das Gerät ist mit einer Grundkonfiguration programmiert. Änderun- gen an Überwachungsbereichen sowie der Parametrierung dürfen nur von autorisierten Personen (Sachkundigen) durchgeführt wer- den. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 10 Die Prüfung vor der Erstinbetriebnahme dient dazu, die in den Nationalen/Internationalen Vorschriften insbesondere der Ma- schinen- oder Arbeitsmittelbenutzerrichtlinie geforderten Sicher- heitsanforderungen zu bestätigen (EG-Konformitätserklärung). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 11 Gehäuse, Frontscheibe, Anschlusskabel usw. Sie prüfen Ihr PLS-System, indem Sie anhand der in Kapitel 6.2 abgedruckten Checkliste vorgehen. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 12 Sollte sich hierbei eine Abweichung ergeben, so ist die Maschine/Anlage/das Fahrzeug sofort stillzusetzen und durch einen Sachkundigen zu überprüfen. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 13 Nein ❏ kategorie? 4. Ist der Zugang/Zugriff zum Gefahrenbereich/zur Gefahrenstelle nur durch das Schutzfeld der BWS möglich? Ja ❏ Nein ❏ 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 14 Justage gegen Verschieben gesichert? Ja ❏ Nein ❏ 10. Sind die erforderlichen Schutzmaßnahmen gegen elektrischen Schlag wirksam (Schutzklasse)? Ja ❏ Nein ❏ 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 15 18. Ist das Hinweisschild zur täglichen Prüfung für den Bediener gut sichtbar angebracht? Ja ❏ Nein ❏ Diese Checkliste ersetzt nicht die erstmalige Inbetriebnahme sowie regelmäßige Prüfung durch einen Sachkundigen. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 16 Für autorisiertes Personal steht mit Hilfe der mitgelieferten Benutzer- software ein ausführliches Diagnosesystem zur Verfügung (siehe Kapitel Benutzersoftware in der Technischen Beschreibung PLS). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 17 Überprüfen Sie regelmäßig die ordnungsgemäße Funktion des Ge- rätes durch Eingreifen in das Schutzfeld entlang der Schutz- feldgrenzen in Übereinstimmung mit den applikationsspezifischen Vorschriften. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 18 Sie finden eine Auflistung des erhältlichen Zubehörs in der Techni- schen Beschreibung zum PLS. Auch die erhältlichen Ersatzteile sind dort aufgeführt. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 20 über Mehrfachauswertung) zweifach 2 x 40 ms sechzehnfach 16 x 40 ms Einschaltzeiten Bei Spannung Ein Leistungsaufnahme (Ohne Last) 17 W 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 21 Mehrfachauswertung Deaktivierung nach WF-Eingriff (2-fach Auswertung) 127 ms Aktivierung bei Warnfeld (WF) frei 40 ms Kurzschlussfest Schaltfolge 3 Hz Lastinduktivität 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 22 Im Fehlerfall: Leckstrom 2,1 mA Fehlerfall: Unterbrechung der GND- Leitung. Das nachgeschaltete Steuer- element muss diesen Zustand als LOW erkennen. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 23 Testpulsbreite 55 µs bzw. 460 µs Testpulshäufigkeit wechselweise alle 40 ms OSSD 1 und OSSD 2 Testpulsbreite 55 µs Testpulshäufigkeit 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 24 Die EG Baumusterprüfung erfolgte gemäß BiA-Prüfempfehlungen, die in wesentlichen Teilen dem aktuellen Normentwurf zu Normentwurf zu IEC 61496-3:1999 entsprechen Typ 3 Typ 3 Typ 3 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 25 Bei der Ver- wendung einer RS 422-Verbindung sollte der Schirm nur einseitig ange- schlossen werden. Der Schirm sollte rechnerseitig aufgelegt werden. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 26 DIN 40040, Tabelle 10, Kennbuchstabe E (mäßig trocken) Sender Infrarot-Laserdiode Wellenlänge 885 nm 905 nm 935 nm Empfänger Öffnungswinkel ± 0,5° ± 1° 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 27 Abmessungen (B x H x T) 155 mm x 185 mm x 156 mm Farbe Frontteil gelb RAL 1021 Rückteil schwarz RAL 9005 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 28 Alle Maße sind in mm dargestellt. Sensorhalteschrauben 11.3 Steckerbelegung Abbildung 4: Steckerbelegung Pinbelegung des Versorgungssteckers Alle Maße sind in mm dargestellt. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 29 Schirm (verdrillt) Stiftleiste Brücke 7-8 zum Umschalten RS 232/RS 422 Legende zu den Adern: grün gelb blau Schirm 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 31 11. Bilag: Forklaring til illustrationerne ........56 11.1 Objekters remissionsgrader ......... 56 11.2 Målskitser ..............56 11.3 Stikfordeling ..............57 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 32 PLS 10X - 317 (best.-nr. 1 022 253) Sikkerhedsscanneren er godkendt som sikkerhedsudstyr til personsikring og opfylder ved korrekt brug de relevante standarder og anvisninger. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 33 (påk- ørselsbeskyttelse på køretøjer). Beskyttelsesfeltets dimensionering skal foretages i overens- stemmelse med angivelserne i den tekniske beskrivelse til PLS. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 34 Arbejdstageren skal instrueres af fagkyndige. 5. Til denne brochure er der i bilaget vedlagt en checkliste som kontrol for producenten og leverandøren. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 35 Kommunikationsledningen til PLS oprettes med en afskærmet dataledning (se kapitlet Tilbehør i den tekniske beskrivelse). Bemærk henvisningerne på næste side! 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 36 Først derefter skal De sikre tilslutningshuset med unbrakoskruerne på siden. Kun hvis begge tilslutningshuse er indsat med pakninger på den beskrevne måde, opfylder huset kapslingsklasse IP 65. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 37 Apparatet er programmeret med en grundkonfiguration. Ændringer i overvågningsområder samt af parametreringen må kun gennemføres af autoriserede personer (fagkyndige). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 38 Kontrollen inden første idrifttagning tjener til at bekræfte de sikkerhedskrav, som kræves ifølge de nationale/internationale forskrifter, især i direktivet vedrørende maskiner eller brugen af arbejdsmidler (EF-overensstemmelsesattest). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 39 De kontrollerer Deres PLS-system ved at gå frem efter den checkliste, som findes i kapitel 6.2. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 40 PLS og vist på køretøjets henvisningsskilt eller i konfigurations- protokollen. Hvis der herved skulle blive fastslået en afvigelse, skal maskinen/anlægget omgående standses og kontrolleres af en fagkyndig. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 41 (mekanisk beskyttelse mod ophold bagved), og som overvåger det, og er disse sikret mod at blive fjernet? 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 42 13. Er beskyttelsesfunktionen i overensstemmelse med kontrolhenvisningerne i denne dokumentation kontrolleret? 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 43 18. Er henvisningsskiltet vedrørende den daglige kontrol anbragt let synligt for operatøren? Denne checkliste erstatter ikke kontrollen ved første idrifttagning og en sagkyndigs regelmæssige kontrol. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 44 Ved en tilsvarende indstilling af autoriserede personer ved hjælp af brugersoftwaren viser PLS både en let tilsmudsning af frontruden over tilsmudsningsadvarslen (ved fuld funktion af apparatet) og en 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 45 Kontroller regelmæssigt, at apparatet fungerer korrekt, ved at gribe ind i beskyttelsesfeltet langs med beskyttelsesfeltets grænser i overensstemmelse med de applikationsspecifikke forskrifter. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 46 De finder en opstilling over det tilbehør, som kan leveres, i den tekniske beskrivelse til PLS. Der finder De også de reservedele, som kan leveres. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 48 2 x 40 ms seksten-dobbelt 16 x 40 ms Indkoblingstider Ved spænding tændt 6 sek. Effektforbrug (ubelastet) 17 W 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 49 Aktivering ved advarselsfelt (AF) frit 40 ms Kortslutningssikker Koblingsfølge 3 Hz Lastinduktivitet Sikkerhedsudgange (OSSD) – dynamisk (HIGH-aktiv) Koblingsspænding HIGH aktiv (Ueff) - 2,5 V 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 50 LOW. ren lastkapacitet 100 nF Koblingsfølge 3 Hz ren lastinduktivitet Ved lavere koblingsfølge er den max. tilladte lastinduktivitet større. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 51 OSSD 1 og OSSD 2 55 Rs Testimpulsbredde Testimpulshyppighed 3 sek. Ledningsspecifikation Ledningslændge 30 m Ledningstværsnit 0,5 mm tilladt ledningsmodstand 2,5 ohm 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 52 Advarselsfelt Rækkevidde (radius) 50 m Remission ved 15 m og 80 mm objektdiameter Sikkerhedskategori ingen Måleområde Rækkevidde (radius) 50 m 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 53 RS 422 Ledningslændge RS 232 15 m RS 422 100 m Antallet af flervejsfortolkninger 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 54 Enkeltchock IEC 68, del 2-27, tabel 2, 15 g/11 ms Vedvarende chock (1000) IEC 68, del 2-29, 10 g/16 ms 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 55 Mål (B x H x D) 155 mm x 185 mm x 156 mm Farve frontdel gul RAL 1021 bagdel sort RAL 9005 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 56 Alle mål er vist i mm. Stikområde 265 mm Illustration 3: Målskitse befæstelsessæt Alle mål er vist i mm. Sensorholdeskruer 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 57 Udvendig kapsling fjernet afisoleret crimpet Afskærmning (snoet) Stiftliste Lus 7-8 til skift RS 232/RS 422 Forklaring til lederne: rød grøn blå Afskærmning 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 59 11. Apéndice: Leyendas para las figuras ........84 11.1 Factores de luminancia de los objetos ......84 11.2 Ilustraciones acotadas............84 11.3 Asignación de los conectores........... 85 8 009 810/AOA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 60 Este dispositivo esta certificado para la protección para personas siempre y cuando se instale según las instrucciones y regulaciones y normas vigentes. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 61 (protección contra choques en vehículos). El dimensionamiento del campo de protección debe efectuarse según las premisas de la descripción técnica del PLS. 8 009 810/AOA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 62 5. En este documento se adjunta como anexo una lista de chequeo para la comprobación por parte del fabricante y del instalador. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 63 (véase el capítulo Accesorios, en la descripción técnica). ¡Por favor, tenga en cuenta las indicaciones de la página siguiente! 8 009 810/AOA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 64 La carcasa cumplirá con el tipo de protección IP 65 solamente cuando ambas cajas de conexión con las juntas estén colocadas y fijadas de la forma descrita. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 65 áreas de supervisión así como la para- metrización, sólo pueden ser efectuadas por personas autorizadas (expertos en la materia). 8 009 810/AOA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 67 - Usted comprueba su sistema PLS procediendo en base a la lista de chequeo impresa en el capítulo 6.2. 8 009 810/AOA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 69 4. ¿Es posible la entrada/acceso al área de peligro/al punto de peligro únicamente a través del campo de protección del Equipo optoectrónico? Sí 8 009 810/AOA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 70 11. ¿Está presente y reglamentariamente aplicado el dispositivo de mando para el rearme (reset) del equipo de protección o para el rearranque de la máquina? Sí 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 71 Esta lista de chequeo no sustituye a la primera puesta en servicio ni a la comprobación regular por parte de un experto. 8 009 810/AOA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 72 (véase el capítulo Software de usuario, en la descripción técnica del PLS). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 73 Compruebe regularmente el funcionamiento correcto del equipo accediendo al campo de protección a lo largo de sus límites, para cumplir las prescripciones específicas de aplicación. 8 009 810/AOA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 74 Encontrará una relación de los accesorios en la descripción técnica del PLS. En ella se indican también las piezas de recambio suministrables. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 76 2 x 40 ms dieciséis veces 16 x 40 ms Tiempos de conexión Con tensión conectada Consumo de potencia (Sin carga) 17 W 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 77 3 Hz Inductividad de carga Salidas de seguridad (OSSD) – dinámicas (HIGH-activo) Tensión de conmutación HIGH, activa (U - 2,5 V 8 009 810/AOA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 78 Inductividad de carga pura. Con secuencia de conmutación baja es mayor la inductividad de carga máx. admisible. Elemento supresor de chispas (combinación RC) 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 79 Especificaciónes del cable Longitud del cable 30 m Sección de los hilos del cable 0,5 mm Resistencia admisible del cable ohmios 8 009 810/AOA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 80 Categoría de seguridad ninguna Area de medición Alcance (radio) 50 m Luminancia Diagrama (véase pág. 67, descripción técnica del PLS) 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 81 únicamente con RS 422 Longitud de cable RS 232 15 m RS 422 100 m Cantidad de controles múltiples Clase de protección láser 8 009 810/AOA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 82 IEC 68, parte 2-29, 10 g/16 ms Resistencia a las interferencias (compatibilidad electromagnética) IEC 61496 - 1, EN 61000-6-4:2001-10, DIN 40839 - 1 y - 3 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 83 (ancho x alto x profundo) 155 mm x 185 mm x 156 mm Color Parte delantera amarilla RAL 1021 Parte trasera negra RAL 9005 8 009 810/AOA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 84 Figura 3: Ilustración acotada de conjuntos de fijación Todas las medidas se indican en mm. Tornillos de seguridad del sensor 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 85 Pantalla (retorcido) Regleta de clavijas Puente 7-8 para conmutación RS 232/RS 422 Leyendas para los hilos: rojo verde amarillo azul Pantalla 8 009 810/AOA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 87 11. Annexe : légende des figures ..........114 11.1 Réémission des objets ..........114 11.2 Plans cotés ..............114 11.3 Brochage des connecteurs......... 115 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 88 Ce composant est certifié pour la protection des personnes et répond aux exigences de la réglementation sous réserve du respect des instructions du manuel. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 89 AGV). La dimension du champ de protection doit respecter les données et les instructions du manuel technique. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 90 3. Les tests doivent être exécutés par des personnes compétentes et/ou des personnes spécialement autorisées/mandatées; ils doivent être documentés et cette documentation doit être disponible à tout moment. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 91 5. Cette brochure est accompagnée d'une liste de vérification annexe à l'adresse du fabricant et de l'intégrateur. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 92 La communication du PLS se fait à travers une liaison blindée (voir le chapitre accessoires dans le manuel technique). Consultez SVP les notes de la page suivante ! 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 93 C'est seulement lorsque les prises sont assemblées correctement avec les joints correctement placés que le boîtier peut atteindre la norme de protection IP 65. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 96 à la vitre, au câble de raccordement etc. Vous contrôlez votre système PLS lorsque vous procédez aux véri- fications de la liste de la section 6.2. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 97 équipés et en mouvement s'arrêtent effectivement lors du fran- chissement du champ de protection en mémoire dans le PLS et 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 98 Si le test révèle le moindre défaut, la machine/installation et/ou le véhicule doivent être arrêtés immédiatement et vérifiés par une personne compé- tente. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 99 6. Les dispositions complémentaires d'ordre mécanique interdisant l'accès par le dessus, le dessous et les côtés ont-elles été prises et sont-elles à l'épreuve des manipulations ? 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 100 14. Les fonctions de protection prévues sont-elles effectives pour chacune des positions du commutateur de mode de fonction- nement ? 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 101 Cette liste de vérification ne dispense en aucune façon de la pre- mière mise en service ni de la vérification régulière de l'ESPE par une personne compétente habilitée. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 102 (voir le chapitre logiciel utilisateur dans le manuel technique du PLS). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 104 Vous trouverez la liste des accessoires disponibles dans le manuel de description technique du PLS. Vous y trouverez également la liste des pièces de rechange. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 106 2 x 40 ms 16 balayages 16 x 40 ms Délais de commutation A la mise sous tension Consommation (hors charge) 17 W 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 107 Inductance de charge Sorties de sécurité (OSSD) – actives à l'état HAUT Tension de commutation Etat HAUT (U - 2,5 V 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 108 100 nF Fréquence de répétition 3 Hz Charge inductive pour une fréquence plus faible, la charge inductive maxi. est plus grande. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 109 Périodicité de l'impulsion test Spécification du câble Longueur 30 m Section des fils 0,5 mm Résistance du câble permise 2,5 Ohm 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 110 Catégorie de sécurité aucune Zone de mesure Portée (rayon) 50 m Réémission voir graphique (cf.. p. 67 Descr. Tech. PLS) 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 111 RS 422 Longueur de câble RS 232 15 m RS 422 100 m Nombre de balayage Classe du laser 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 112 CEI 68, partie 2-29, 10 g/16 ms Immunité électromagnétique (CEM) CEI 61496 - 1, EN 61000-6-4:2001-10, DIN 40839 - 1 et - 3 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 113 Dimensions (L x H x P) 155 mm x 185 mm x 156mm Couleur Face avant jaune RAL 1021 Face arrière noire RAL 9005 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 114 Cote d'enfichage 265 mm Figure 3 : plans cotés des systèmes de fixation Toutes dimensions en mm. Vis de fixation du capteur 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 115 (mâle) pont 7-8 de commutationr RS 232/RS 422 Légende des fils : rouge vert jaune bleu blindage 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 117 10. Tekniset tiedot PLS 10X-317..........134 11. Liite: Kuvien selitys ............142 11.1 Kohteiden heijastuskyky..........142 11.2 Mittapiirrokset ............. 142 11.3 Pistoliittimet ..............143 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 118 PLS 10X-317 (til.nro 1 022 253) Tämä laite on hyväksytty henkilösuojalaitteeksi ja täyttää tarkoitusta vastaavat säännökset, kunhan käyttö on käyttöohjeen mukaista. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 119 (vaaravyöhykkeiden valvonta tai vaaravyöhykkeelle pääsy) että myös liikkuvissa sovelluksissa (vaunujen/ajoneuvojen törmäyssuoja). Suojakentän on oltava suunniteltu PLS:n teknisessä esitteessä annettujen vaatimusten mukaisesti. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 120 Käyttäjä on perehdyttettävä laitteen toimintaan asiantuntevan henkilön taholta. 5. Liitteenä tässä esitteessä on tarkastuslista valmistajalle ja laitteen ostajalle laitetarkastusta varten. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 121 PLS:lle menevänä tiedonsiirtojohtona on käytettävä suojattua tiedonsiirtojohtoa (ks. kohta Lisävarusteet teknisestä esitteestä). Huomioi seuraavalla sivulla annetut ohjeet! 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 122 PLS-kotelo vastaa kotelointiluokkaa IP65 vain silloin kun, molempien liittimien suojakotelot ja niihin tarvittavat tiivisteet on asennettu ja kiinnitetty yllä kuvatulla tavalla. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 123 6 sekä teknisessä esitteessä annetut ohjeet. Laitteeseen on tehtaalla ohjelmoitu perusasetukset. Valvonta-alueita ja parametrejä saavat muuttaa vain valtuutetut (asiantuntevat) henkilöt. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 124 - erityisesti koneita ja työvälineiden käyttöä koskevissa direktiiveissä - edellytetyt turvallisuusvaatimukset on täytetty (EC-vaatimustenmukaisuusvakuus). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 125 PLS-järjestelmän tarkastus suoritetaan kappaleessa 6.2 olevan tarkastuslistan perusteella. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 126 Jos esiintyy poikkeamia, kone/laitteisto/ajoneuvo on pysäytettävä välittömästi ja annettava asiantuntijan tarkastaa se. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 127 (mekaaninen suoja estämään pääsyn vyöhykkeelle), ja onko suojukset varmistettu siten, ettei niitä voida poistaa? Kyllä 6. Onko muut tarvittavat mekaaniset suojalaitteet asennettu 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 128 12. Ovatko turvalaitteen lähdöt (OSSD) vaaditun ohjausjärjestelmän luokituksen mukaisia ja vastaavatko ne kytkentäkaavioita? Kyllä 13. Onko suojatoiminto tarkastettu tässä doukumentissa esitettyjen tarkastusohjeiden mukaisesti? 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 129 18. Onko päivittäiseen tarkastukseen tarvittava ohjekilpi kiinnitetty hyvin näkyvään paikkaan? Kyllä Tämä tarkastuslista ei korvaa asiantuntijan taholta suoritettavaa ensimmäistä käyttöönottoa ja säännöllisiä tarkastuksia. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 130 LED-merkkivalojen tehtävänä on antaa ensidiagnoositietoja järjestelmän tilasta. Valtuutetun henkilöstön käytettävissä on yksityiskohtainen vianetsintäjärjestelmä laitteen mukana toimitetun ohjelmiston avulla (ks. kappale Ohjelmisto PLS:n teknisestä esiteestä). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 131 Samoin on tarkastettava liittimien suojakoteloiden ruuviliitokset. Laitteen asianmukainen toiminta on tarkastettava säännöllisesti häiritsemällä suojakenttää kentän rajoja pitkin sovelluskohtaisten määräysten mukaisesti. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 132 (ks. PLS:n tekninen esite). Lisätietoja saa vastaavalta Sick-edustajalta. 8. Lisätarvikkeet PLS:n teknisessä esitteessä on luettelo saativissa olevista lisätarvikkeista sekä varaosista. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 134 Vasteaika (ohjelmoitavissa) kaksinkertainen 2 x 40 ms kuusitoistakertainen 16 x 40 Päällekytkentäaika jännite päällä Ottoteho (kuormittamaton) 17 W 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 135 Lähdön aktivointi varoituskentän ollessa vapaa 40 ms Oikosulkusuojaus kyllä Kytkentätaajuus 3 Hz Kuormitusinduktanassi Turvalähdöt (OSSD) – dynaamiset (HIGH-aktiiviset) Kytkentäjännite HIGH-aktiivinen (U - 2,5 V 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 136 Low-tilana. Kuormituskapasitanssi 100 nF Kytkentätaajuus 3 Hz Kuormitusinduktanssi Pienellä kytkentäjaksolla on suurin sallittu kuormitusinduktanssi suurempi. Kipinänsammutuspiirii (RC-yhdistelmä) ilman 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 137 OSSD 1 ja OSSD 2 Testipulssin leveys 55 ms Testipulssitaajuus Johdot Johdon pituus 30 m Johdon poikkipinta-ala 0,5 mm Sallittu johtovastus 2,5 Ohm 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 138 Toimintaetäisyys (säde) 50 m Heijastuskyky 15 mm 80 mm kohteesat 20 % Turvaluokitus ei ole Mittausalue Toimintaetäisyys (säde) 50 m 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 139 500 kBd jatkuvaan tietokoneliitäntään saa käyttää vain RS 422-liitäntää Johdon pituus RS 232 15 m RS 422 100 m Skannausnopeus Laserluokka 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 140 IEC 68, osa 2-29, 10 g/16 ms Häiriönkestävyys (EMV) IEC 61496 - 1, EN 61000-6-4:2001-10, DIN 40839 - 1 ja - 3 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 141 Mitat (L x K x S) 155 mm x 185 mm x 156 mm Väri etuosa keltainen RAL 1021 takaosa musta RAL 9005 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 142 Kuva 2: PLS:n mittapiirros Kaikki mitat on annettu mm:nä. liitosalue 265 mm Kuva 3: kiinnitysjalkojen mittapiirros Kaikki mitat on annettu mm:nä. anturien kiinnitysruuvit 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 143 (kierretty) pinna silta 7-8, kytkentä RS 232/RS 422 varten Johtimien värit: punainen vihreä keltainen sininen suojajohdin 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 145 11. Appendix: Key to the diagrams........170 11.1 Diffuse reflectance of objects ........170 11.2 Dimensional drawings ..........170 11.3 Pin assignments ............171 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 146 This device is certified for use as personal protection unit and fulfil, when operated according to the instructions, the appropriate regula- tions. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 147 (collision avoidance in vehicles). The protective field must be dimensioned according to the advice as laid down in the PLS technical description. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 148 The operator is to be instructed by specialists. 5. The appendix to this brochure includes a checklist for testing by the manufacturer and equipment provider. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 149 The communication connection to the PLS is made using a screened data cable (see chapter Accessories in the technical description). Please read the notes on the following page! 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 150 Only when both connection housings with seals have been installed and secured as described does the housing comply with enclosure rating IP65. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 151 The device is programmed with a basic configuration. Alterations to monitoring areas as well as to the parameter settings may only be carried out by authorized personnel (specialists). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 152 - The operating personnel of the machine protected by the safety device must receive instruction from specialists working for the 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 153 Check your PLS system by following the checklist printed in chapter 6.2. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 154 The data for the points listed below must be present by the time of first commissioning at the latest – although this depends on 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 155 6. Are additional mechanical safety devices installed to prevent access above, beneath and around the protected area, and are these secure against manipulation? 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 156 14. Are the specified protective functions effective at all settings of the mode selector switch? 15. Are the switching elements (e.g. contactors, valves) actuated by the NCSD monitored? 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 157 This checklist is no substitute for first commissioning or regular test- ing by a specialist. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 159 Regularly check that the device is functioning correctly by reaching into the protective field along its edges, corresponding to the appro- priate application regulations. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 160 A list of all available accessories can be found in the PLS technical description. The replacement parts available are also listed. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 162 2 x 40 ms sixteen-speed 16x40 ms Power-up times On voltage ON Power consumption (no load) 17 W 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 163 Switching frequency 3 Hz Load inductivity Safety outputs (OSSD) – dynamic (HIGH active) Switching voltage HIGH active (U - 2.5 V 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 164 100 nF Switching frequency 3 Hz Pure load inductivity At low switching frequencies the max. permissible load inductivity is higher. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 165 Test pulse width Test pulse frequency Cable specifications Cable length 30 m Cable cross section 0.5 mm Permissible line resistance 2.5 Ohm 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 166 Reflectance at 15 m and 80 mm object diameter Safety category None Measuring range Range (radius) 50 m Reflectance Graph (see p. 67 of PLS TD) 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 167 RS 422 Cable length RS 232 15 m RS 422 100 m Scan rate Laser protection class 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 168 IEC 68, Part 2-29, 10 g/16 ms Interference strength (EMC) IEC 61496 - 1, EN 61000-6-4:2001-10, DIN 40839 - 1 and - 3 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 169 Dimensions (W x H x D) 155 mm x 185 mm x 156 mm Colour Frontpart yellow RAL 1021 Backpart black RAL 9005 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 170 All measurements are in mm Plug area 265 mm Figure 3: Dimensional drawing of mounting kits All measurements are in mm Sensor mounting screws 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 171 Stripped Crimped Screen (twisted) Pin strip Jumper 7-8 for switching between RS 232/RS 422 Wire descriptions: green yellow blue screen 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 173 11. ÐáñÜñôçìá: Õðüìíçìá ãéá ôéò áðåéêïíßóåéò ....198 11.1 Âáèìüò áíÜêëáóçò áíôéêåéìÝíùí........ 198 11.2 Åéêüíåò äéáóôÜóåùí.............. 198 11.3 ÊáôÜëçøç óõíäÝóìïõ............199 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 174 PLS 10X - 317 (áñéèìüò ðáñáããåë. 1 022 253) Η συσκευή αυτή έχει πιστοποιηθεί ως διάταξη προστασίας ατόµων και ανταποκρίνεται στις σχετικές προδιαγραφές εφόσον γίνεται κανονική εφαρµογή της. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 175 (ðñïóôáóßá ï÷çìÜôùí áðü óõãêñïýóåéò). Ç äéáóôáóéïðïßçóç ôïõ ðñïóôáôåõôéêïý ðåäßïõ ðñÝðåé íá ðñáãìáôïðïéåßôáé óýìöùíá ìå ôéò ïäçãßåò ôçò Ôå÷íéêÞò ÐåñéãñáöÞò ôïõ PLS. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 176 5. Áõôü ôï öõëëÜäéï óõíïäåýåôáé ìå ôç ìïñöÞ ðáñáñôÞìáôïò áðü Ýíáí óõíçììÝíï ðßíáêá åëÝã÷ïõ ãéá ôïí Ýëåã÷ï áðü ôïí êáôáóêåõáóôÞ Þ ôïí åöïäéáóôÞ. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 177 Ï åðéêïéíùíéáêüò áãùãüò ðñïò ôï PLS ðñáãìáôïðïéåßôáé ìå Ýíá èùñáêéóìÝíï áãùãü äåäïìÝíùí (âëÝðå êåöÜëáéï åîáñôçìÜôùí ôçò Ôå÷íéêÞò ðåñéãñáöÞò). Ðáñáêáëïýìå íá ëÜâåôå õðüøç ôéò õðïäåßîåéò ôùí êÜôùèé óåëßäùí! 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 178 ðåñéâëÞìáôá óýíäåóçò ìáæß ìå ôéò öëÜíôæåò óýìöùíá ìå ôïí ôñüðï ðïõ ðåñéãñÜøáìå, ôüôå ìüíï áíôáðïêñßíåôáé ôï ðåñßâëçìá óôï åßäïò ðñïóôáóßáò ÉÑ 65. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 179 Ç óõóêåõÞ Ý÷åé ðñïãñáììáôéóôåß ìå ìéá âáóéêÞ äéÜñèñùóç. ÁëëáãÝò óôïõò ôïìåßò åðéôÞñçóçò êáèþò åðßóçò êáé óå ðáñáìÝôñïõò, åðéôñÝðåôáé íá ãßíïíôáé ìüíï áðü åîïõóéïäïôçìÝíá Üôïìá (Ýìðåéñá). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 180 ðïõ åðéâÜëëïíôáé ùò áíáãêáßåò óôïõò Åèíéêïýò/Äéåèíåßò Êáíïíéóìïýò, éäéáßôåñá óôéò Ïäçãßåò ðåñß Ìç÷áíþí Þ Ïäçãßåò ×ñÞóåùò ÌÝóùí Åñãáóßáò (ÄÞëùóç Óõììüñöùóçò ÅÏÊ) 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 181 3. Êáèçìåñéíüò Ýëåã÷ïò ôçò åãêáôÜóôáóçò ðñïóôáóßáò áðü áñìüäéá êáé åîïõóéïäïôçìÝíá Üôïìá: ÊáôÜ ôïí åîÞò ôñüðï åëÝã÷åôå ôï äéêü óáò óýóôçìá PLS, óýìöùíá ìå ôïõò êáíïíéóìïýò: 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 182 äéÜóôçìá ðñïêýøåé êÜðïéá áðüêëéóç, ôüôå èá ðñÝðåé ç ìç÷áíÞ/ç åãêáôÜóôáóç/ôï ü÷çìá íá áêéíçôïðïéçèåß áìÝóùò êáé íá õðïâëçèåß óå Ýëåã÷ï áðü êÜðïéïí åéäéêü. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 183 4. Ç ðñüóâáóç/ç ðñïóðÝëáóç óôçí åðéêßíäõíç ðåñéï÷Þ/óôï åðéêßíäõíï óçìåßï åßíáé äõíáôÞ ìüíï äéá ìÝóïõ ôïõ ðñïóôáôåõôéêïý ðåäßïõ ôïõ BWS; Íáé ❏ Ï÷é ❏ 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 184 12. Åßíáé ïé Ýîïäïé ôùí BWS (OSSD) óõíäåäåìÝíåò óýìöùíá ìå ôçí áðáñáßôçôç êáôçãïñßá åëÝã÷ïõ êáé áêüìç áíôéóôïé÷ïýí óôá äéáãñÜììáôá óýíäåóçò; Íáé ❏ Ï÷é ❏ 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 185 Ï÷é ❏ Ï ðáñþí ðßíáêáò åëÝã÷ïõ äåí áíôéêáèéóôÜ ôçí ðñþôç èÝóç óå ëåéôïõñãßá, ïýôå êáé ôïõò ôáêôéêïýò åëÝã÷ïõò áðü êÜðïéïí åéäéêü. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 186 óôç äéÜèåóÞ ôïõ ðáñÜëëçëá ìå ôï âïçèçôéêü ëïãéóìéêü ðïõ óáò ðáñáäþóáìå, Ýíá ëåðôïìåñÝò óýóôçìá äéÜãíùóçò (âëÝðå êåöÜëáéï Ëïãéóìéêü ÷ñÞóôç óôçí Ôå÷íéêÞ ÐåñéãñáöÞ ôïõ PLS). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 187 óõóêåõÞò ìå åðÝìâáóç óôï ðåäßï ðñïóôáóßáò êáôÜ ìÞêïò ôùí ïñßùí ôïõ ðåäßïõ ðñïóôáóßáò, ôçñþíôáò üìùò ðÜíôá ôïõò åéäéêïýò êáíïíéóìïýò åöáñìïãÞò. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 188 Óôçí Ôå÷íéêÞ ÐåñéãñáöÞ ôïõ PLS èá âñåßôå ìéá ëßóôá ôïõ åîïðëéóìïý ðïõ ìðïñåßôå íá ðñïìçèåõôåßôå. Åäþ áíáöÝñïíôáé åðßóçò êáé ôá áíôáëëáêôéêÜ ðïõ ìðïñåßôå íá ðáñáããåßëåôå. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 190 2 x 40 ms äåêáåîáðëÜóéïò 16 x 40 ×ñüíïé äéÜñêåéáò óýíäåóçò Ìå ôÜóç óå åíÝñãåéá ÊáôáíÜëùóç éó÷ýïò (÷ùñßò öïñôßï) 17 W 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 191 Áíèåêôéêüôçôá óå âñá÷õêýêëùìá íáé Áêïëïõèßá ìåôáãùãÞò 3 Hz ÅðáãùãÞ öïñôßïõ Åîïäïé áóöáëåßáò (OSSD) — (HIGH-åíåñãÝò) ÔÜóç ìåôáãùãÞò HIGH-åíåñãÝò (U - 2,5 V 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 192 100 nF Áêïëïõèßá ìåôáãùãÞò 3 Hz êáñáñÞ åðáãùãÞ öïñôßïõ ìå åëáôôùìÝíç áêïëïõèßá ìåôáãùãÞò ç ìÝã. åðéôñåðôÞ åðáãùãÞ öïñôßïõ åßíáé ìåãáëýôåñç 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 193 55 ìs Óõ÷íüôçôá äïêéìáóôéêþí ðáëìþí ÐñïäéáãñáöÞ áãùãïý ÌÞêïò áãùãïý 30 m ÄéáôïìÞ áãùãïý 0,5 mm ÅðéôñåðôÞ áíôßóôáóç áãùãïý 2,5 Ohm 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 194 Ðåñéï÷Þ ìÝôñçóçò ÊÜëõøç (áêôßíá) 50 ì ÄéÜ÷õôç áíÜêëáóç ÄéÜãñáììá (âë.ó. 67 ÔÂ PLS) Åõêñßíåéá ôçò ìÝôñçóçò åìâÝëåéáò ± 50 mm 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 195 óõíå÷Þò åðéêïéíùíßá õðïëïãéóôþí ÌÞêïò áãùãïý RS 232 15 ì RS 422 100 ì Áñéèìüò ôùí ðïëëáðëþí áðïôéìÞóåùí ÔÜîç ðñïóôáóßáò ëÝéæåñ 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 196 IEC 68, ìÝñïò 2-29, 10 g/16 ms Áôñùóßá Ýíáíôé ðáñåìâïëþí (EMV) IEC, 61496 - 1, EN 61000-6-4:2001-10, DIN 40839 - 1 êáé - 3 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 197 ÄéáóôÜóåéò (Ð x Õ x Â) 15 mm x 185 mm x 156 mm ×ñþìá Πρόσθιο τµήµα κίτρινο RAL 1021 Πίσω τµήµα µαύρο RAL 9005 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 198 ÔïìÝáò åìâõóìÜôùóçò 265 mm Áðåéêüíéóç 3: Åéêüíá äéáóôÜóåùí ôùí óåô óôåñÝùóçò Ïëåò ïé äéáóôÜóåéò áíáãñÜöïíôáé óå mm Âßäåò óôåñÝùóçò ôïõ áéóèçôçñßïõ 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 199 ÐÞ÷õò áêßäùí ÃÝöõñá 7-8 ãéá ôç ìåôáãùãÞ ôïõ RS 232/RS 422 Õðüìíçìá ãéá ôïõò êëþíïõò: êüêêéíç ðñÜóéíç êßôñéíç ãáëÜæéï èùñÜêéóç 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 201 10. Dati tecnici PLS 10X-317............218 11. Appendice: Legenda dei disegni ..........226 11.1 Percentuale di riflessione degli oggetti......226 11.2 Disegni dimensionali............226 11.3 Connessioni elettriche ............227 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 202 PLS 10X-317 (n° d'ordine 1 022 253) Questo apparecchio è stato certificato come dispositivo di protezione personale, se impiegato secondo destinazione, in adempimento delle direttive pertinenti. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 203 L'area di sicurezza deve essere dimensionata in base ai dati conte- nuti nella Descrizione tecnica del PLS. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 204 5. In appendice al presente manuale si trova una lista di controllo destinata al costruttore e all'equipaggiatore. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 205 La comunicazione con il PLS viene realizzata mediante cavo dati schermato (vedere capitolo Accessori nella Descrizione tecnica). Si prega di osservare le indicazioni riportate alla pagina seguente. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 206 L'involucro risponde al grado di protezione IP65 solo se entrambi gli involucri di collegamento con le rispettive guarnizioni sono impiegati e fissati nel modo descritto nel presente manuale. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 207 L'apparecchio è stato programmato con configurazione di base. Solo il personale autorizzato (qualificato) può eventualmente modificare i campi di controllo ed i parametri. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 208 Verifica dell'efficienza del dispositivo di sicurezza della macchina in tutti i possibili modi operativi, in base alla lista di controllo alle- gata. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 209 L'utente verifica il proprio sistema PLS attenendosi alla lista di controllo contenuta nel capitolo 6.2. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 210 Se si dovesse constatare una differenza, si dovrà fermare immediatamente la macchina o l'impianto che dovrà essere controllato da per- sona qualificata. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 211 4. L'accesso/l'intervento all'area di pericolo/al luogo pericoloso è possibile solo attraverso l'area di sicurezza del BWS? Sì ❏ No ❏ 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 212 11. Esiste il dispositivo di Restart del dispositivo di sicurezza BWS ovvero della macchina, e sono stati applicati in modo regolamentare? Sì ❏ No ❏ 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 213 La presente lista di controllo non sostituisce la prima messa in funzione ed il regolare controllo che dovrà essere effettuato da un esperto in materia. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 214 Se opportunamente programmato da personale autorizzato, il sof- tware del PLS visualizza sia il leggero Imbrattamento del frontale ottico, tramite l'apposito indicatore, (l'apparecchio continua a funzio- 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 215 Tenere costantemente sotto controllo il regolare funzionamento del- l'apparecchio, intervenendo lungo la delimitazione dell'area di sicu- rezza attenendosi alle relative norme di applicazione. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 216 La lista degli accessori disponibili è riportata nella Descrizione tecni- ca del PLS. Essa contiene anche i pezzi di ricambio disponibili. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 218 2 x 40 ms 16 volte 16 x 40 Tempi di attivazione Con tensione on Potenza assorbita (senza carico) 17 W 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 219 127 ms Attivazione con area di preallarme (WF) libera 40 ms Resistente ai cortocircuiti sì Sequenza commutazioni 3 Hz Induttanza carico 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 220 L'elemento di controllo collegato in serie deve riconoscere questo stato come LOW. pura capacità carico 100 nF Sequenza commutazioni 3 Hz 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 221 Frequenza impulsi di Test alternativamente ogni 40 ms OSSD 1 e OSSD 2 Ampiezza impulsi di Test 55 µs Frequenza impulsi di Test 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 222 BIA che corrispondono in linea di massima all'attuale progetto di norma corrispondente dalla norma IEC 61496-3:1999 Tip 3 Tip 3 Tip 3 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 223 Lo schermo dovrebbe trovarsi sul lato calcolatore. Velocità di trasmissione RS 232 9600 Baud 56 kBaud 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 224 905 nm 935 nm Rilevatore Angolo di apertura ± 0,5° ± 1° Involucro Materiale alluminio pressofuso Frontale ottico Materiale policarbonato 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 225 Dimensioni (largh. x alt. x profond.) 155 mm x 185 mm x 156 mm Colore Parte anteriore gialla RAL 1021 Parte posteriore nera RAL 9005 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 226 Figura 3: Disegno dimensionale dei set di fissaggio Tutte le misure sono in mm. Viti per il fissaggio del sensore 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 227 Schermo (attorcigliato) Frutto per contatti maschi Ponte 7-8 per commutazione RS 232/RS 422 Legenda dei fili: rosso verde giallo schermo 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 229 10. Tekniske data for PLS 10X-317.......... 246 11. Vedlegg: Tegnforklaring til figurene........254 11.1 Remisjonsgrader til objekter........254 11.2 Målskisser..............254 11.3 Kontaktkonfigurasjon ..........255 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 230 PLS 10X-317 (best.nr. 1 022 253) Dette produktet er godkjent som personsikkerhet, når produktet blir brukt i henhold til manualen og gjeldende regelverk. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 231 (påkjørselsbeskyttelse på kjøretøy). Dimensjoneringen av sensorområdet* må være i henhold til den tekniske beskrivelsen for PLS. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 232 Arbeidstakeren skal settes inn i bruken av sakkyndige. 5. Denne bruksanvisningen har en sjekkliste for kontroll fra fabrikanten og montøren. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 233 Kommunikasjonsledningen til PLS lages med en skjermet dataledning (se kapittelet Tilbehør i den tekniske beskrivelsen). Følg anvisningene på neste side! 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 234 Først da skal kontakthuset festes med umbrakoskruene i siden. Huser tilfredsstiller IP-grad IP65 først når kontakthuset med tetninger er satt i og festet som beskrevet over. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 235 Apparatet er programmert med en grunnkonfigurasjon. Endringer av overvåkingsområder og parametre må kun utføres av autoriserte personer (sakkyndige). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 236 - Brukerne som skal bruke maskinen sikret med verneinnretningen, må før arbeidet starter være satt inn i bruken av utstyret av 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 238 Angivelsene til punktene under må minst foreligge ved første gangs bruk - men alt etter applikasjon, hvis krav fabrikant/ utruster må kontrollere. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 239 7. Er maskinens maks. stopptid eller etterløpstid kontrollmålt og angitt og dokumentert (på maskinen og/eller i maskinens dokumentasjon)? 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 240 14. Fungerer de angitte vernefunksjonene ved hver innstilling av driftsvelgeren? 15. Er bryterelementene PLS styrer, f.eks. vern, ventiler, overvåket? 16. Fungerer PLS i hele den fareskapende tilstanden? 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 241 18. Er anvisningsskiltet for daglig kontroll anbrakt godt synlig for brukeren? Denne sjekklisten erstatter ikke kontroll før første gangs bruk samt regelmessig kontroll av en sakkyndig. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 242 Ved tilsvarende forhåndsinnstilling med brukerprogramvaren utført av autoriserte personer indikerer PLS både en lett tilsmussing av frontglasset via tilsmussingsadvarsel (ved full apparatfunksjon) og 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 243 Kontroller også alle skrueforbindelser på terningstøpslene. Kontroller jevnlig at apparatet fungerer forskriftsmessig ved å gripe inn i sensorområdet langs grensene i samsvar med applikasjonsspesifikke forskrifter. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 244 8. Tilbehør I den tekniske beskrivelsen for PLS er det en liste over tilbehøret. Tilgjengelige reservedeler er også oppført der. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 246 2 x 40 ms seksdobbelt 16x40 ms Innkoplingstider Ved spenning på Effektforbruk (uten last) 17 W 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 247 40 ms Kortslutningssikker Koplingsrekkefølge 3 Hz Lastinduktivitet Sikkerhetsutganger (OSSD) – dynamisk (HIGH-aktiv) Brytespenning HIGH aktiv (U - 2,5 V ueff 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 248 LOW. ren lastkapasitet 100 nF Koplingsrekkefølge 3 Hz ren lastinduktivitet Ved liten koplingsrekkefølge er maks. tillatt lastinduktivitet større. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 249 OSSD 1 og OSSD 2 55 Os Testpulsbredde Testpulsfrekvens Ledningsspesifikasjon Ledningslengde 30 m Ledningstverrsnitt 0,5 mm tillatt ledningsmotstand 2,5 Ohm 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 250 20 % Sikkerhetskategori ingen Måleområde Rekkevidde (radius) 50 m remisjon Skjema (se s. 67 i teknisk beskrivelse for PLS) 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 251 RS 422 Ledningslengde RS 232 15 m RS 422 100 m Antall multivariable løsninger Laserbeskyttelsesklasse 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 252 IEC 68, del 2-29, 10 g/16 ms Sikkerhet mot forstyrrelser (EMV) IEC 61496 - 1, EN 61000-6-4:2001-10, DIN 40839 - 1 og - 3 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 253 Mål (B x H x D) 155 mm x 185 mm x 156 mm Farge Frontside gul RAL 1021 Bakside svart RAL 9005 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 254 Alle mål er vist i mm. Pluggområde 265 mm Fig. 3: Målskisse festesett Alle mål er vist i mm. Sensorfesteskruer 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 255 Avisolert Crimpet Skjerm (snodd) Stiftlist Bro 7-8 til omkopling av RS 232/RS 422 Tegnforklaring for ledere: rød grønn blå skjerm 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 257 11. Bijlage: legenda bij de afbeeldingen........282 11.1 Reflectiewaardes van objecten ........282 11.2 Maatschetsen ............. 282 11.3 Connectoraansluiting..........283 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 258 PLS 10X-317 (bestelnummer 1 022 253) Dit apparaat is gecertificeerd voor gebruik als persoonsbeveiliging en voldoet, zoals gebruikt in de handleiding omschreven, de huidige voorschriften. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 259 De afmeting van het veiligheidsveld moet volgens de gegevens van de Technische Beschrijving van de PLS plaatsvinden. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 260 5. In deze brochure is als bijlage een checklist opgenomen voor de controle door de fabrikant en de inrichter. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 261 De communicatieleiding naar de PLS wordt met een afgeschermde dataleiding gemaakt (zie hoofdstuk accessoires in de technische beschrijving). Let a.u.b. op de aanwijzingen op de volgende pagina! 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 262 Alleen wanneer de beide kubusvormige connectoren met afdichtingen op de beschreven wijze ingezet en bevestigd worden, voldoet het huis aan de beschermklasse IP 65. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 263 Het apparaat is voorgeprogrammeerd met een basisconfiguratie. Wijzigingen in de bewakingsgebieden alsmede de parameterring mogen alleen door geautoriseerde personen (specialisten) worden uitgevoerd. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 264 (EG-con- formiteitsverklaring) Controle van de werkzaamheid van de veiligheidsinrichting op de machine in alle op de machine instelbare functies overeen- 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 265 U kunt uw PLS-systeem controleren, door aan de hand van de in hoofdstuk 6.2 afgedrukte checklist te werk te gaan. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 266 Wanneer er hier een afwijking wordt vastgesteld moet de machine/ installatie/het voertuig onmiddellijk gestopt en door een specialist gecontroleerd worden. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 267 3. Voldoet de veiligheidsinrichting aan de vereiste besturingscategorie? 4. Is de toegang tot de gevarenzone/gevaarlijke plaats alleen via het veiligheidsveld van de contactloos werkende veiligheidsinrichting mogelijk? 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 268 11. Is het commandotoestel voor de reset van de (BWS) veiligheidsinrichting c.q. voor de herstart van de machine aanwezig en reglementair aangebracht? 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 269 18. Is het aanwijzingsbord voor de dagelijkse controle goed zichtbaar voor de operator aangebracht? Deze checklist vervangt niet de eerste inbedrijfstelling en de regelmatige controle door een specialist. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 270 Voor geautoriseerd personeel staat met behulp van de bijgevoegde gebruikerssoftware een uitvoerig diagnosesysteem beschikbaar (zie hoofdstuk gebruikerssoftware in de technische beschrijving van de PLS). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 271 Controleer de reglementaire functie van het apparaat regelmatig door langs de grenzen in het veiligheidsveld te grijpen volgens de toepassingsspecifieke voorschriften. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 272 U vindt een lijst met verkrijgbare accessoires in de technische beschrijving van de PLS. Ook de verkrijgbare reserveonderdelen staan daar vermeld. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 274 2 x 40 zestienvoudig 16 x 40 Inschakeltijden Bij spanning aan Vermogensopname (zonder last) 17 W 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 275 (WF) vrij 40 ms Korsluitbestendig Schakelvolgorde 3 Hz Lastinductiviteit Veiligheidsuitgangen (OSSD) – dynamisch (HIGH-actief) Schakelspanning HIGH actief (U - 2,5 V 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 276 LOW herkennen. zuivere lastcapaciteit 100 nF Schakelvolgorde 3 Hz zuivere lastinductiviteit Bij geringe schakelvolgorde is de max. toegelaten lastinductiviteit groter. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 277 55 Ps Testimpulsbreedte Testimpulsfrequentie Leidingsspecificatie Leidingslengte 30 m Leidingsdoorsnede 0,5 mm toegelaten leidingsweerstand 2,5 Ohm Kenmerke Gegevens min. type max. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 278 Reflectie bij 15 m en 80 mm objectdiameter Veiligheidscategorie geen Meetbereik Reikwijdte (radius) 50 m Reflectie Diagram (z.p. 67 TB PLS) 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 279 RS 422 toegestaan Leidingslengte RS 232 15 m RS 422 100 m Aantal meervoudige evaluaties Laserbeschermklasse 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 280 IEC 68, deel 2-29, 10 g/16 ms Storingsbestendigheid (EMC) IEC 61496 - 1, EN 61000-6-4:2001-10, DIN 40839 - 1 en - 3 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 281 Afmetingen (B x H x T) 155 mm x 185 mm x 156 mm Kleur Voorzijde geel RAL 1021 Achterzijde zwart RAL 9005 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 282 Alle maten zijn in mm weergegeven. Steek 265 mm Afbeelding 3: Maatschets bevestigingssets Alle maten zijn in mm weergegeven. Sensor bevestigingsschroeven 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 283 Afscherming (gevlochten) Stiftlijst Brug 7-8 voor eht omschakelen van RS 232/RS 422 Legenda bij de aders: rood groen geel blauw scherm 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 285 11. Anexo: Legendas das figuras ..........310 11.1 Factores de luminância dos objectos ......310 11.2 Desenhos cotados............310 11.3 Atribuição dos pinos das fichas........311 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 286 O presente aparelho está certificado como dispositivo de protecção de pessoas e cumpre, em caso de utilização conforme a sua finalidade, as disposições legais em vigor. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 287 O dimensionamento do campo de protecção deve ser efectuado de acordo com as prescrições descritas na Descrição Técnica do PLS. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 288 O operador deve ser instruído por um profissional especializado. 5. O presente manual inclui em anexo uma lista de verificação destinada ao fabricante ou fornecedor. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 289 O cabo de comunicação ao PLS é constituído por um cabo de dados blindado (vide o capítulo Acessórios da Descrição Técnica). Por favor, observe as instruções da página seguinte! 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 291 O aparelho encontra-se programado com uma configuração base. Alterações no campo monitorizado, bem como na parametrização devem ser realizadas apenas por pessoas devidamente autorizadas (especialista). 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 292 (Declaração de conformidade da CE). Verificação da eficácia do dispositivo de segrurança na máquina, considerando todos os modos operacionais disponíveis na 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 293 A inspecção do sistema PLS é efectuada segundo a lista de verificação constante no capítulo 6.2. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 294 Se, por ventura, verficar uma discrepância nesta funcionalidade, a máquina/instalação/veículo deve ser imediatamente desactivado e sujeito a uma inspecção por um profissional especializado. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 295 4. O acesso à zona/ao local de perigo apenas pode ser feito passando pelo campo de protecção do DPT? Não 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 296 (DPT) dispositivo de segurança ou para reiniciar a máquina encontra-se instalado e montado em conformidade? Não 12. As saídas do DPT (OSSD) foram conectadas de acordo com 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 297 Não Esta lista de verificação não substitui a primeira colocação em serviço, nem a inspecção regular por um profissional especializado. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 298 PLS indica, através do aviso de sujidade, tanto uma sujidade ligeira do vidro frontal 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 300 8. Acessórios A lista de acessórios disponíveis encontra-se na Descrição Técnica do PLS. Nesta lista também constam as peças sobressalentes disponíveis. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 302 2 x 40 ms 16 vezes 16 x 40 Tempo de activação Sob Tensão Ligada Potência absorvida (sem carga) 17 W 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 303 Indutância sob carga Saídas de segurança (OSSD) – dinâmicas (activas com HIGH) Tensão de comutação activa com HIGH (U - 2,5 V 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 304 3 Hz Indutância efectiva sob carga Com uma sequência de comutação mais reduzida a indutância máxima admissível sob carga é maior. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 305 Frequência dos impulsos de teste Especificações dos cabos Comprimento do cabo 30 m Secção do cabo 0,5 mm Resistência admissível do cabo 2,5 Ohm 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 306 Luminância com 15 m e um diâmetro do objecto de 80 mm 20 % Categoria de segurança nenhuma Área de medição Alcançe (raio) 50 m 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 307 RS 422 Comprimento do cabo RS 232 15 m RS 422 100 m Número de análises múltiplas 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 308 IEC 68, parte 2-29, 10 g/16 ms Resistência electromagnética (EMV) IEC 61496 - 1, EN 61000-6-4:2001-10, DIN 40839 - 1 e - 3 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 309 155 mm x 185 mm x 156 mm Parte da frente amarela RAL 1021 Parte de trás preta RAL 9005 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 310 Área de encaixe 265 mm Figura 3: Desenho cotado Conjuntos de fixação Todas as medidas representadas em mm. Parafusos de fixação do sensor 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 311 Blindagem (torcida) Régua dos pinos Jumper 7-8 para comutar entre RS 232/RS 422 Legenda dos condutores: vermelha verde amarela azul Blindagem 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 313 10. Tekniska data PLS 10X-317..........330 11. Bilaga: Förklaring till bilderna ..........338 11.1 Föremåls remissionsgrad ........... 338 11.2 Måttbilder ..............338 11.3 Stiftbeläggning............339 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 314 PLS 10X-317 (Best.Nr. 1 022 253) Denna utrustningar är certificerad för användning som personskyddssanordning och uppfyller vid ändamålsenlig användning gällande föreskrifter. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 315 (övervakning av faroområden resp.tillträde till faroområden) som i mobila applikationer (påkörningsskydd för fordon). Skyddsområdesdimensioneringen måste göras enligt bestämmelserna i Teknisk beskrivning PLS. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 316 5. Denna broschyr bifogas en checklista för kontroller, som skall utföras av tillverkare och leverantör. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 317 Kommunikationen med PLS sker medelst en avskärmad dataledning (se kapitlet Tillbehör i Teknisk beskrivning). Var god observera anvisningarna på nästa sida! 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 318 Nu kan anslutningschassit fästas med hjälp av insexskruvarna på sidan. Endast när båda kubkontakterna med tätningar sätts in och fästa enligt beskrivningen ovan, innehar chassit skyddsklass IP 65. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 319 Utrustningen har programmerats med en grundkonfiguration. Ändringar av övervakningsområden liksom parameterbestämning får endast utföras av auktoriserad (sakkunniga) personer. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 320 (EU-konformitetsdeklaration). Kontroll av skyddsanordningens funktion under alla driftssätt, som kan ställas in på maskinen enligt bifogad checklista. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 321 PLS-System kontrolleras genom att man går igenom checklistan i Kapitel 6.2. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 322 överens. Inställningarna återfinns även på typskylt i fordonet. Förekommer vid denna kontroll avvikelser, skall maskinen/ anläggningen/fordonet omedelbart stängas av och kontrolleras av sakkunnig personal. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 323 1. Baserar säkerhetsföreskrifterna på maskinens gällande riktlinjer resp. normer? 2. Återfinns gällande riktlinjer och normer i konformitetsdeklarationen? 3. Motsvarar skyddsanordningen krävd styrkategori? 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 324 8. Är BVS:s säkerhetsavstånd till närmast liggande faroområde korrekt? 9. Är alla BVS-komponenter korrekt fästa och säkrade mot förskjutning? 10. Finns nödvändiga skyddsåtgärder mot elektrisk stöt (skyddsklass)? 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 325 18. Är informationsskylten för den dagliga kontrollen synligt uppsatt för användaren? Denna checklista ersätter inte kontroll vid första idrifttagande, heller inte regelbunden kontroll av sakkunnig personal. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 327 Kontrollera också alla skruvelement vid kubkontakterna. Kontrollera också regelbundet utrustningens funktion genom att inkräkta på skyddsområdet längs dess gränser, i enlighet med specifikation. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 328 återförsäljare. 8. Tillbehör En lista över tillgängliga tillbehör finns i Teknisk beskrivning. Där finns även en lista över befintliga reservdelar. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 330 Dubbel 2 x 40 ms 16 gånger 16 x 40 ms Inkopplingstider Spänning PÅ Effektförbrukning (utan last) 17 W 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 331 Aktivering vid fritt varningsområde 40 ms Kortslutningssäker Kopplingsföljd 3 Hz Lastinduktivitet Säkerhetsutgångar (OSSD) – dynamisk (HIGH-aktiv) Kopplingsspänning HIGH aktiv (U - 2,5 V 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 332 Low. Ren lastkapacitet 100 nF Kopplingsföljd 3 Hz Ren lastinduktivitet Vid lägre kopplingsföljd är den maximalt tillåtna lastinduktiviteten större. 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 333 OSSD 1 och OSSD 2 55 Rs Testpulsbredd Testpulsintervall Kabelspecifikation Kabellängd 30 m Kabelgenomsnitt 0,5 mm Tillåtet kabelmotstånd 2,5 Ohm 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 334 Typ 3 Typ 3 Varningsområde Räckvidd (Radie) 50 m Remission vid 15 m och 80 mm Föremålsdiameter 20 % Säkerhetskategori Ingen 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 335 Överföringshastighet RS 232 9600 baud 56 kbaud RS 422 9600 baud 500 kbaud ständig datorförbindelse endast tillåten med RS 422 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 336 905 nm 935 nm Mottagare Öppningsvinkel ± 0,5° ± 1° Chassi Material Aluminiumgjutgods Frontruta Material Polykarbonat Frontyta med repskyddande beläggning 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 337 Mått (B x H x D) 155 mm x 185 mm x 156 mm Färg Frontparti gul RAL 1021 Bakparti suart RAL 9005 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 338 Bild 2: Måttbild PLS Alla mått i mm. Kontaktområde 265 mm Bild 3: Måttbild, fästelement Alla mått i mm. Fästskruvar för sensor 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 339 Avlägsnad yttermantel Avisolerad Crimpad Skärm (tvinnad) Stiftlist Brygga 7-8 för omkoppling RS 232/RS 422 Förklaring, ledare: röd grön blå skärm 8 009 810/OA87/13-09-04 Operating Instruction • PLS © SICK AG • Industrial Safety Systems • Germany • All rights reserved...
Seite 346 Phone +81 (0)3 3358 1341 E-Mail info@sick.jp K o r e a More representatives and agencies Phone +82-2 786 6321/4 in all major industrial nations at E-Mail kang@sickkorea.net www.sick.com SICK AG • Industrial Safety Systems • Waldkirch • Germany • www.sick.com...

Diese Anleitung auch für:

Pls 10x-317 1 022 253

SICK PLS Bedienungsanleitung

Verfügbare Sprachen

Quicklinks

Verwandte Anleitungen für SICK PLS

Inhaltszusammenfassung für SICK PLS

Diese Anleitung auch für: