Beko HNT61110X Handbuch Seite 16

4 Cleaning and Maintenance
placed in the dishwasher without being jammed.
4.2 Washing By Hand
• You can use a special oil dissolving agent for
stubborn dirt. You can get this agent from the
authorised sales center.
• Soften the metal oil filter in hot water containing
dishwashing liquid.
• Use a brush for cleaning and wait for the liquid
on the metal oil filter to be drained well. Rinse
the filters well after cleaning.
• Technical specifications and this manual may be
changed without prior notice.
• This appliance complies with the Regulation for
Supervision of the Waste Electric and Electronic
Equipment.
• This hood is designed to be used over the hob.
Make sure that the wall can bear the weight of
the hood. Cost of crushing, cutting and similar
procedures to be carried out on the wall or cabi-
net during installation should be covered by the
consumer. The hood may be used with a flue
system that discharges the air, or without a flue
(by attaching the carbon filter). Pay attention
to the matters that may be encountered before
or during the installation. Installation should
be performed by the authorised service agent.
Installation should be carried out by an author-
ised specialist who has knowledge of ventila-
tion. Service life of the appliance identified by
the Ministry of Industry (period of availability
for the spare parts required for the performance
of functions of the appliance) is 10 (ten) years.
• Your appliance must be kept in its original
packaging to avoid damage to its components
during handling and transportation.
• Keep the appliance in its normal position during
handling.
16 / EN Kitchen Hood / User Manual