3.3.2
The transducer can be operated with other customer related display units or
voltage supplies.
The electrical connection is to be made by means of suitable cables considering
EMI demands and according to the pin description shown below:
Downloaded from
www.Manualslib.com
Operation With Other Supply And Evaluation Units
Socket
Type SubD,
15pole, male
Pin 1:
Identification: 33 kΩ
Pin 2:
Signal Output 0-10VDC
Pin 3:
AGND
Pin 4:
Voltage Supply 24VDC
Pin 5:
Supply GND
Pin 6:
Relay 1, N.O.
Pin 7:
Relay 1, Common
Pin 8:
Relay 1, N.C.
Pin 9:
-
Pin 10:
RS485 +
Pin 11:
RS485 -
Pin 12:
Shield
Pin 13:
Relay 2, N.O.
Pin 14:
Relay 2, Common
Pin 15:
Relay 2, N.C.
We recommend to have Shield (Pin 12) and supply common
(Pin5) grounded in the supply unit.
Incorrect connection or inadmissible supply voltage can damage
the transducer.
manuals search engine
35
VSM-de-171005