3.3.2 Operation with other Supply and Evaluation Units
The transducer can be operated with other customer related display units or volta-
ge supplies.
The electrical connection is to be made by means of suitable cables considering
EMI demands and according to the pin description shown below:
Socket
Pin1:
2
1
Pin2:
5
Pin3:
Pin4:
3
4
Pin5:
Maximum admissible load resistor in :
(Supply Voltage[V] - 9 V) / 0.02 A
Incorrect connection or inadmissible supply voltage can damage
the transducer!
M12, A-coded, 5pole, male
Do not connect
Signal Output 4-20 mA
Voltage Supply 9...30 VDC
Do not connect
Shield
VCC200-4-20 mA-201126
23