Operation With Other Supply And Evaluation Units - thyracont VSP63D Betriebsanleitung

3.3.2 Operation with other Supply and Evaluation Units

The transducer can be operated with other customer related display units or volta-
ge supplies.
The electrical connection is to be made by means of suitable cables considering
EMI demands and according to the pin description shown below:
Socket
Pin1:
Pin2:
Pin3:
Pin4:
Pin5:
Pin6:
Pin7:
Pin8:
Pin9:
Pin10:
Pin11:
Pin12:
Pin13:
Pin14:
Pin15:
We recommend to have Shield (pin 12) and supply common (pin
5) grounded in the supply unit.
Incorrect connection or inadmissible supply voltage can damage
the transducer!
Sub-D, 15-pole, male
Identification: 15 k
Signal Output 0-10 VDC
AGND
Voltage Supply 24 VDC
Supply GND
Relay 1, N.O.
Relay 1, Common
Relay 1, N.C.
-
RS485 +
RS485 -
Shield
Relay 2, N.O.
Relay 2, Common
Relay 2, N.C.
VSP/VCP-RS485-200116
35