Cleaning And Maintenance; Environmental Concerns; Troubleshooting - Concept NO8000 Bedienungsanleitung

EN
HOLDER INSTALLATION
1. For use on smooth surfaces such as ceramics, glass, marble, wood.
Stick the sticker to the surface of your choice (Fig. 3). Let it dry for about 8 hours. Then you can place the appliance
in the holder.
2. If you want to mount the holder directly on a wall, use a screw (mounting material is included in the package, Fig. 4).
Important safety information Before placing the appliance on the holder, make sure that it is completely cool (approx.
30 minutes).

CLEANING AND MAINTENANCE

1. Wait for an hour for the appliance to cool down completely.
2. To clean the appliance, use only a soft damp sponge dipped in water.
3. Never wash or rinse the appliance with running water.

TROUBLESHOOTING

This chapter lists the most common problems you may encounter when using the appliance. If the instructions below do
not help you to solve the problem, contact the Jindřich Valenta - Concept company service department.
48
Fig. 3
Fig. 4
Problem
There is no steam coming out of the
appliance. The light indicator is off.
There is no steam coming out of the
appliance. The light indicator is on.
Water drops coming out of the
steam jet.
Water spurting out of the steaming
unit.
SERVICE
Extensive maintenance or repair, which requires access to internal parts of the product, has to be performed by a qualified
specialist or the service centre.

ENVIRONMENTAL CONCERNS

• Packaging materials and old appliances should be recycled.
• Packaging materials may be disposed of as sorted waste.
• Dispose the plastic bags made of polyethylene (PE) of as sorted waste.
Recycling of the appliance at the end of its lifespan:
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical
and electronic appliances (Waste Electrical and Electronic Equipment - WEEE). The symbol on the product
or on its packaging indicates that this product may not be treated as household waste. Instead, it should
be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused by inappropriate waste handling
of this product. The disposal of such material has to be done according to the recycling regulations. For
more detailed information about recycling of this appliance see the authorized local office or service for
household waste disposal or the shop, where you purchased the appliance.
The product meets all the necessary requirements of the EU directives applicable to the specific product.
Changes in text, design, and technical specifications are subject to change without prior notice and we reserve the right
to change them.
NO8000 NO8000
Cause
The appliance is not plugged in. Plug in the appliance.
Check your home's power supply. Ask
Power failure / circuit breaker failure.
a professional for help.
Add water and let the appliance cool
The thermal fuse is not working.
down.
The water tank is empty. Fill the tank with water.
Continue steaming until the condensed
Condensed water.
water evaporates.
Pay attention to and observe the
There is too much water in the water
maximum capacity and all the
tank.
instructions given.
EN
Remedy
49