Technical Design - SATA paint set 10 Betriebsanleitung

Operating Instructions SATA FDG
■ Key for refill opening

7. Technical Design

7.1. SATA paint set 10
Single pressure reducer
[3-61] Material supply ball valve
[3-62] Material supply connection
[3-63] Safety valve
[3-64] Ventilation valve
[3-65] Material pressure controller
[3-66] Spraying air connection
Double pressure reducer
[4-61] Material supply ball valve
[4-62] Material supply connection
[4-63] Safety valve
[4-64] Ventilation valve
[4-65] Material pressure controller
[4-66] Spraying pressure
controller
Second gun connection
[7-1] Material supply ball valve
[7-2] Material supply connection
Hand agitator
Hand crank for agitator
[9-1]
Motor driven agitator
[10-7] Electric motor for agitator
Compressed air agitator without gear drive
[11-25] Sound absorber
[11-26] Air micrometer (air flow
control knob)
Compressed air agitator without gear drive
[12-1] Sound absorber
[12-2] Air micrometer (air flow
control knob)
7.2. SATA FDG 24 / 48
Single pressure reducer
[5-1] Single pressure reducer
[3-67] Spraying air ball valve
[3-68] Single pressure reducer
[3-69] Compressed air supply ball
valve
[3-70] Compressed air supply
connection
[4-67] Double pressure reducer
[4-68] Spraying air connection
[4-69] Compressed air supply ball
valve
[4-70] Compressed air supply
connection
[7-3] Spraying air connection
[7-4] Spraying air ball valve
Ventilation valve
[9-2]
[11-27] Pneumatic motor air
connection
[11-28] Air Motor
[12-3] Pneumatic motor air
connection
[12-4] Pneumatic motor with gear
EN
129