Safety Instructions - SATA paint set 10 Betriebsanleitung

Operating Instructions SATA FDG
■ When no original accessories and spare parts are used.
■ When the product is manipulated, tampered with or technically modi-
fied.
■ Natural wear / and tear
■ In case when the product has been exposed to untypical shockloads
and impacts during usage.
■ Assembly and disassembly
1.6. Applicable directives, regulations and standards
94/9/EC guideline
Equipment and protective systems intended for use
in potentially explosive atmospheres (ATEX)
Directive 2014/68/EU
Pressure Equipment Directive, series module A1 (internal production in-
spection) as per DIN EN 13445
EN 1127-1:2011
Explosive atmospheres Part 1: Basic concepts and methodology
EN 13463-1:2009
Non-electrical equipment for use in potentially explosive atmospheres –
Part 1: Basic concepts and requirements
DIN EN ISO 12100-1/-2
Safety of machinery, general requirements
EN 1953:2013
Atomising and spraying equipment for coating materials - Safety require-
ments
DIN 31000:2011
"General principles for the safe design of products."

2. Safety Instructions

Always read and heed all instructions given below. Failure to comply or
incorrect compliance can result in malfunctions or cause injuries.
2.1. Requirements regarding personnel
The material pressure tank may only be used by experienced skilled
workers and instructed persons who have thoroughly read and under-
stood these operating instructions. People whose reactions have been
adversely affected by drugs, alcohol, medication or by any other means
are prohibited from handling the material pressure tank.
EN
125